On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
Walbro TI F90000274 450LPH E85 Compatible In-Tank Fuel Pump With QFS for Sale
Rated 4.67 out of 5
4 reviews
In Stock
At a Glance
- Condition: BRAND NEW aftermarket performance part (NOT a used OEM in-tank pump)
- Brand: Genuine Walbro / TI Automotive, sourced through authorized distribution
- Anti-counterfeit verification: Holographic authenticity sticker on original Walbro packaging, manufacturer barcode verified against database, serial number traceable to Walbro / TI Automotive manufacturer, TI Automotive registration card included
- Flow specification: 450 LPH (liters per hour) at 40 PSI - nearly double a typical OEM in-tank pump output
- E85 ethanol compatible: Internal materials engineered for ethanol fuel exposure (high-octane ethanol blends do not destroy pump internals)
- Application target: Forced-induction and high-output naturally aspirated engine builds (de facto standard upgrade for in-tank fuel pump platforms running serious power)
- QFS Install Kit option: Available as upgrade for customers needing fresh strainer, boot, electrical connector, and hardware (specify QFS application during ordering for kit fitment to specific platform)
- Pricing: $189 base price (counterfeit F90000274 units sell for sub-$120 - that price is a red flag for counterfeit)
- Common platforms: Subaru WRX / STI, Mitsubishi Lancer Evolution VIII / IX / X, Honda K-series swap builds, Ford Mustang GT (forced-induction upgrade target), Chevrolet Camaro SS (supercharger upgrade target), and most other in-tank platforms (verify physical fit)
- Warranty: Manufacturer warranty (Walbro / TI Automotive) - this is a brand-new manufacturer-warranted item
- Shipping: Free shipping to all 50 states via UPS or FedEx Ground
- Honest category disclosure: If you are looking for a used OEM in-tank fuel pump assembly for a standard non-performance vehicle, this listing does NOT apply - call (855) 634-4447 and we will help you find the correct used OEM in-tank fuel pump
Buick Century Dash Wiring Harness for Sale | OEM Used Instrument Panel Wiring
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, electrical continuity tested at key connectors, insulation condition documented
- Availability: In stock, Buick Century dash wiring harness available
- Shipping: Specialty shipping to all 50 states (wiring harness requires careful packaging to prevent connector damage), 5 to 10 business days
- Part verified as instrument panel / dash wiring harness for Buick Century applications
- GENERATION SPECIFICATION REQUIRED: Buick Century was produced across multiple substantially different generations (1973-1981 RWD intermediate, 1982-1996 A-body FWD, 1997-2005 W-body FWD final generation) - specify your Century year and generation when ordering
- Electrical continuity tested at key connectors (no obvious open circuits or broken conductors)
- Insulation condition documented (no major degradation, no obvious damage, no rodent damage)
- Connector terminals inspected (no obvious corrosion, no melted plastic from short circuits, terminal retention features intact)
- Routing features inspected (retention clips and protective sleeve / loom condition)
- Major branch points verified (instrument cluster connector, HVAC connector, fuse panel connection, etc.)
- VINTAGE / AGE CONSIDERATIONS: Buick Century harnesses span 19-52 plus year age range across generations
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, function tested before shipping
- Availability: In stock, Toyota Crown HPDI fuel pump available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Generation verified (S210 2012-2018, S220 2018-2022, or S230 2022 plus the 16th generation crossover-sedan hybrid)
- Engine variant confirmed (2.5L 2AR-FE, 3.5L 2GR-FXE, 2.0L 8AR-FTS turbo, 2.5L Dynamic Force A25A-FXS hybrid, 3.5L V6 Dynamic Force, or 2.4L Turbo Hybrid)
- HPDI (High-Pressure Direct Injection) variant noted vs port-injection variant
- Function tested for flow and pressure at OEM spec (high-pressure direct injection pumps require precise pressure delivery)
- Electrical connector condition verified
- Fuel inlet and outlet port condition documented
- Drive cam follower condition assessed (for direct-cam-driven HPDI pumps)
- Mounting hardware condition checked
- Backed by a 15 day replacement warranty against internal defects
At a Glance
- Condition: OEM used, function tested before shipping
- Availability: In stock, Porsche Cayman S fuel pump available
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Chassis generation verified (987 2005-2012, 981 2013-2016, or 718 2017 plus)
- Engine variant confirmed (3.4L M97 flat-6, 3.4L MA1 flat-6 direct injection, 2.5L turbo flat-4, or 4.0L flat-6 GTS / GT4)
- Pump rated 200 LPH (liters per hour) for the Cayman S fuel demand
- Function tested for flow and pressure at OEM spec
- Electrical connector condition verified
- Fuel inlet and outlet port condition documented
- In-tank module assembly condition assessed (where supplied as complete module)
- Mounting hardware condition checked
- Backed by a 15 day replacement warranty against internal defects
1966 Mustang Wiring Harness for Sale | Complete 22-Circuit Restoration Harness
Rated 4.67 out of 5
4 reviews
In Stock
At a Glance
- Condition: Brand new restoration-grade harness, OEM-equivalent specification
- Availability: In stock, ready to ship
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- 22 circuits with factory connectors pre-installed
- Modern ATC fuse panel with covered micro-fuse block
- GXL high-temperature, abrasion-resistant wire throughout
- Pre-built dash harness with gauge cluster disconnect
- 175 amp Mega Fuse Kit included
- HEI / EFI compatible replacement ignition switch included
- Headlight switch with 26-amp internal circuit breaker included
- Floor dimmer switch included, steering column adapter kit included
- 100% fitment for 1965-1966 Ford Mustang
- Backed by a 15 day replacement warranty against manufacturing defects
Nissan 280Z Fuel Pump for Sale | OEM Used Electric Fuel Pump for the 1975 to 1978 Nissan 280Z with the L28 2.8L SOHC Inline-6 Engine
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, function tested before shipping
- Availability: In stock, Nissan 280Z fuel pump available (limited quantity for this classic application)
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application verified (1975-1978 Nissan 280Z with L28 2.8L SOHC inline-6)
- Fuel pump construction confirmed (this listing is the standard OEM electric fuel pump setup; for the aluminum-body steel-internals variant see vaz581 in our catalog, the SAME 1975-1978 Nissan 280Z application with different pump construction)
- Pump function tested for flow and pressure at OEM spec
- Electrical connector condition verified
- Fuel inlet and outlet port condition documented
- Mounting bracket condition assessed
- External seal and gasket surface inspected
- Internal pump element condition documented
- Backed by a 15 day replacement warranty against internal defects
Audi A8 A/C Wiring Harness for Sale | OEM Used Air Conditioning Harness for A8 Flagship Sedan and S8
Rated 4.50 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, electrical continuity tested before shipping
- Availability: In stock for Audi A8 D2 and D3 chassis (and matching S8)
- Shipping: Free shipping to all 50 states via carrier delivery
- Electrical continuity tested on every wire
- Insulation integrity inspected (no damaged or burned insulation)
- Connector pins verified (no corrosion, no bent pins)
- Shielding continuity checked where applicable
- No shorts between wires (insulation resistance verified)
- Color-code verified to OEM specification
- 125 degree Celsius insulation rating for engine bay heat
- Chassis disambiguation provided (D2/D3/D4/D5 distinction)
- No core charge required
- Backed by a 15 day replacement warranty against operational defects
Chevrolet Venture Catalytic Converter for Sale | OEM Used Direct-Fit Catalytic Assembly
2 reviews
In Stock
At a Glance
- Condition: OEM used, inspected before shipping
- Availability: In stock, ready to ship
- Shipping: Free shipping to all 50 states, fast transit
- Stainless shell, precious-metal honeycomb, OE O2 bungs
- Verify your state emissions law before installing a used converter
- Clamp included where shown; gaskets and bolts not included
- No core charge required
- Backed by a 15 day replacement warranty against operational defects
Infiniti QX70 Engine Wiring Harness for Sale | OEM Used 3.7L V6 Engine Loom
2 reviews
In Stock
At a Glance
- Condition: OEM used, end-to-end continuity tested before shipping
- Availability: In stock, ready to ship
- Shipping: Free shipping to all 50 states, fast transit
- For Infiniti QX70 (2014 to 2017), confirm by VIN
- Part type: engine wiring harness (loom)
- Material: copper wiring with heat-resistant PVC or Teflon insulation
- Connectors: corrosion-resistant OEM-style
- Voltage: 12V
- Engine: primarily the 3.7L V6, confirm by VIN
- No core charge required
- Backed by a 15 day replacement warranty against operational defects


About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA








