At a Glance
- Condition: OEM used high-voltage electric AC compressor, bench-safe tested, connector inspected per unit
- Availability: In stock for GMC Hummer EV applications (2022-2025)
- Shipping: Free shipping to all 50 states (hazmat / high-voltage compliant), 5 to 10 business days
- Application: GMC Hummer EV (2022-2025 pickup and SUV)
- Type: Electric scroll compressor, high-voltage
- SAFETY-CRITICAL: EV-qualified install, system de-energized
- Oil: GM-approved low-conductivity oil, NOT standard PAG
- Configuration: With or without integrated drive electronics (by VIN)
- Refrigerant: R-1234yf (evacuate and recharge with R-1234yf equipment)
- Not included: Refrigerant, oil, high-voltage cabling, seals, mounting hardware unless confirmed at order
- Qualified EV/high-voltage service ONLY - not a do-it-yourself job
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used AC compressor with clutch, bench tested, clutch engagement verified, seal condition documented per unit
- Availability: In stock for Nissan Altima applications (verify year and engine by VIN)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on AC components
- Application: Nissan Altima (multi-generation coverage) - CRITICAL: confirm year and engine by VIN
- Engine options: I4 (four-cylinder) or V6 configurations - compressors differ
- Refrigerant: R-134a system with PAG oil
- Note per source: '1993' entry looks off - verify actual year and generation by VIN
- Early Altimas use I4 engines; later Altimas add V6 (compressors differ across generations)
- Related 2013 Altima OEM 92600-3TA0A specific listing available for L33 pre-facelift applications
- Not included: Receiver-drier, O-rings, refrigerant, PAG oil unless confirmed at order
- AC service equipment required to evacuate and recharge; professional installer
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used AC compressor with clutch, bench tested, clutch engagement verified, seal condition documented per unit
- Availability: In stock for 2008 Honda CR-V applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on AC components
- Application: 2008 Honda CR-V (third-generation, RE1-RE5 chassis)
- Engine: 2.4L I4 K24Z1 (K-series inline-4)
- Clutch included with AC compressor
- Refrigerant: R-134a system
- Cross-batch context: Third-gen CR-V (vs first-gen CR-V B20B era from our related listing)
- Not included: Receiver-drier, O-rings, refrigerant, PAG oil unless confirmed at order
- AC service equipment required to evacuate and recharge; professional installer
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used AC compressor with clutch, bench tested, clutch engagement verified, seal condition documented per unit
- Availability: In stock for 2013 Nissan Altima applications (L33 pre-facelift)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on AC components
- Application: 2013 Nissan Altima (L33 pre-facelift sedan, fifth-generation)
- Engine variants: 2.5L QR25DE inline-4 or 3.5L VQ35DE V6
- OEM part number 92600-3TA0A (same for both 2.5L and 3.5L variants)
- Clutch: 6-groove pulley configuration
- Refrigerant: R-134a system
- Cross-batch context: Same L33 pre-facelift as our 2013 Nissan Altima Headlight listing
- Not included: Receiver-drier, O-rings, refrigerant, PAG oil unless confirmed at order
- AC service equipment required to evacuate and recharge; professional installer
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used AC compressor with clutch, bench tested, clutch engagement verified, seal condition documented per unit
- Availability: In stock for 2010 Honda Civic applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on AC components
- Application: 2010 Honda Civic (eighth-generation Civic, FA/FG chassis)
- Engine variants: 1.8L R18 (mainstream) or 2.0L K20 (Si variant)
- Clutch: 6-groove pulley match
- Refrigerant: R-134a system
- Not included: Receiver-drier, O-rings, refrigerant, PAG oil unless confirmed at order
- AC service equipment required to evacuate and recharge; professional installer
- Related AC compressor listings: 2013 Nissan Altima, 2008 Honda CRV, Nissan Altima (generic)
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper arm, arm integrity checked, pivot inspected, finish documented per unit
- Availability: In stock for Infiniti Q70 applications (2014-2019)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti Q70 (V8 / V6 midsize luxury sedan; renamed from M-series in 2014)
- Side verification required (driver or passenger)
- Attachment type verification required
- Arm straight, no bends or stress marks
- Pivot splines clean, cap and nut present
- Finish sound coating, no cracks or heavy rust
- Basic hand tools to remove cap and nut, set park position
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper linkage assembly, pivot play checked, bushings inspected, arm integrity documented per unit
- Availability: In stock for Infiniti QX4 applications (1997-2003)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX4 (compact luxury SUV; classic Pathfinder-based)
- Year verification required (by exact year)
- Front wiper transmission / linkage assembly
- Pivots show no excess play, smooth movement
- Bushings intact, not worn or cracked
- Arms straight, no bends or stress marks
- Set the park sweep on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper motor, bench tested through speed settings, output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX30 applications (2016-2020)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX30 (subcompact luxury crossover) - front windshield wiper motor
- Platform: Q30 / Mercedes-Benz GLA shared platform (some parts Daimler sourced)
- Year and build verification required
- Runs in speed settings on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used rear wiper motor, bench tested (runs and parks), output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX50 applications (2014-2017 or 2019+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX50 (compact luxury crossover) - rear hatch wiper motor
- Generation verification required by VIN (2014-2017 renamed EX vs 2019+ all-new)
- Runs and parks correctly on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- Related Infiniti wiper listings: See our QX30 Front Wiper Motor, QX4 Wiper Linkage, and Q70 Wiper Arm listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
