At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2001 Honda Civic and related applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2001-2005 Honda Civic (seventh-generation Civic, EM/ES chassis)
- Specification: 70 Amp output, 12 Volt, 6-groove serpentine pulley
- Engine variants: 1.7L D17 (mainstream trims) or 2.0L K20 (Si variant, 2002-2005)
- Amperage match for your trim required
- Not included: Belt, tensioner, and mounting hardware unless confirmed at order
- Basic hand tools, serpentine belt tool, multimeter to verify charging after install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper arm, arm integrity checked, pivot inspected, finish documented per unit
- Availability: In stock for Infiniti Q70 applications (2014-2019)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti Q70 (V8 / V6 midsize luxury sedan; renamed from M-series in 2014)
- Side verification required (driver or passenger)
- Attachment type verification required
- Arm straight, no bends or stress marks
- Pivot splines clean, cap and nut present
- Finish sound coating, no cracks or heavy rust
- Basic hand tools to remove cap and nut, set park position
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used lamp wiring harness, continuity tested end to end on lighting circuits, pins inspected, loom integrity documented per unit
- Availability: In stock for Infiniti QX80 (2014+) and QX56 (2011-2013) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Infiniti QX80 (full-size luxury SUV; renamed from QX56 in 2014) - lighting wiring loom
- Year and lighting package verification required
- Continuity end to end on the lighting circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Bulbs, lamp assemblies, modules, and other looms (unless ordered)
- Qualified technician required for correct lighting connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used auxiliary wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Amigo miscellaneous wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Amigo (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- No year on the live page - match by VIN or OEM part number
- Continuity end to end, no open or shorted circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Modules, sensors, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper linkage assembly, pivot play checked, bushings inspected, arm integrity documented per unit
- Availability: In stock for Infiniti QX4 applications (1997-2003)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX4 (compact luxury SUV; classic Pathfinder-based)
- Year verification required (by exact year)
- Front wiper transmission / linkage assembly
- Pivots show no excess play, smooth movement
- Bushings intact, not worn or cracked
- Arms straight, no bends or stress marks
- Set the park sweep on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper motor, bench tested through speed settings, output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX30 applications (2016-2020)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX30 (subcompact luxury crossover) - front windshield wiper motor
- Platform: Q30 / Mercedes-Benz GLA shared platform (some parts Daimler sourced)
- Year and build verification required
- Runs in speed settings on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used rear wiper motor, bench tested (runs and parks), output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX50 applications (2014-2017 or 2019+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX50 (compact luxury crossover) - rear hatch wiper motor
- Generation verification required by VIN (2014-2017 renamed EX vs 2019+ all-new)
- Runs and parks correctly on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- Related Infiniti wiper listings: See our QX30 Front Wiper Motor, QX4 Wiper Linkage, and Q70 Wiper Arm listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used transmission wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Ascender transmission wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Ascender (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Platform: GM midsize (related to GMC Envoy and Chevy TrailBlazer, GMT360 platform)
- Continuity end to end on the transmission circuits
- Connector pins straight, seated, and clean; loom insulation flexible
- Not included: TCM, sensors, solenoids, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2010 Toyota Corolla applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2010 Toyota Corolla (compact sedan)
- Engine variants: 1.8L (base, OEM 27060-0R010) or 2.4L (Corolla XRS variant, output may differ)
- Engine and OEM part number verification required
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for Audi A4 applications (1996+ US market)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: Audi A4 (compact executive sedan / Avant wagon) - year and engine confirmation by VIN
- Engine variants: 1.8T (turbocharged inline-4) or 2.8 V6 (naturally aspirated V6)
- Output and pulley vary by engine variant - verify at order
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
