At a Glance
- Condition: OEM used emblem, surface condition documented, adhesive backing inspected per unit
- Availability: In stock for GMC Sonoma (1991-2004) and GMC S-15 (1982-1990) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on emblem components
- Application: GMC Sonoma (1991-2004) or GMC S-15 (1982-1990, earlier GMC compact truck)
- CRITICAL: GMC Sonoma / S-15 emblem, NOT Chevrolet S-10 (which wears a Chevrolet emblem)
- Location: Hood, tailgate, grille, or fender
- Condition: New or used (verify at order)
- Adhesive: Whether adhesive is included
- Not included: Additional adhesive, removal tools, or paint unless confirmed at order
- Basic surface prep and adhesive mounting; no drilling needed
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2001 Honda Civic and related applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2001-2005 Honda Civic (seventh-generation Civic, EM/ES chassis)
- Specification: 70 Amp output, 12 Volt, 6-groove serpentine pulley
- Engine variants: 1.7L D17 (mainstream trims) or 2.0L K20 (Si variant, 2002-2005)
- Amperage match for your trim required
- Not included: Belt, tensioner, and mounting hardware unless confirmed at order
- Basic hand tools, serpentine belt tool, multimeter to verify charging after install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used tempered rear glass, glass inspected, edge condition verified, clarity documented per unit
- Availability: In stock for Austin 1800 applications (1964-1975)
- Shipping: Free shipping to all 50 states, 5 to 10 business days on glass components (careful handling)
- Application: Austin 1800 (classic non-US market British family sedan)
- Exact year verification required
- Glass with no cracks, chips, or deep scratches
- Edge condition sound, no chips that spread
- Clarity - no delamination or fogging in the layers
- Not included: gaskets, trim clips, urethane unless ordered
- Glass setting tools + correct urethane or gasket + second person required
- Classic vehicle disclosure applies (approximately 50-60 years old)
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper arm, arm integrity checked, pivot inspected, finish documented per unit
- Availability: In stock for Infiniti Q70 applications (2014-2019)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti Q70 (V8 / V6 midsize luxury sedan; renamed from M-series in 2014)
- Side verification required (driver or passenger)
- Attachment type verification required
- Arm straight, no bends or stress marks
- Pivot splines clean, cap and nut present
- Finish sound coating, no cracks or heavy rust
- Basic hand tools to remove cap and nut, set park position
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used laminated windshield, glass condition inspected, edge condition verified, clarity documented per unit
- Availability: In stock for Infiniti M56 applications (2011-2013)
- Shipping: Free shipping to all 50 states, 5 to 10 business days on glass components (careful handling)
- Application: Infiniti M56 (V8 M sedan; became Q70 from 2014 model year)
- Features verification: sensor, acoustic, heated, and mount options
- Glass with no cracks, chips, or deep scratches
- Edge condition sound, no chips that spread
- Clarity - no delamination or distortion in laminated layers
- Glass setting tools, correct urethane, and professional installer required for watertight seal
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper linkage assembly, pivot play checked, bushings inspected, arm integrity documented per unit
- Availability: In stock for Infiniti QX4 applications (1997-2003)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX4 (compact luxury SUV; classic Pathfinder-based)
- Year verification required (by exact year)
- Front wiper transmission / linkage assembly
- Pivots show no excess play, smooth movement
- Bushings intact, not worn or cracked
- Arms straight, no bends or stress marks
- Set the park sweep on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front wiper motor, bench tested through speed settings, output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX30 applications (2016-2020)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX30 (subcompact luxury crossover) - front windshield wiper motor
- Platform: Q30 / Mercedes-Benz GLA shared platform (some parts Daimler sourced)
- Year and build verification required
- Runs in speed settings on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used rear wiper motor, bench tested (runs and parks), output tested under load, connector inspected per unit
- Availability: In stock for Infiniti QX50 applications (2014-2017 or 2019+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiper components
- Application: Infiniti QX50 (compact luxury crossover) - rear hatch wiper motor
- Generation verification required by VIN (2014-2017 renamed EX vs 2019+ all-new)
- Runs and parks correctly on bench test
- Drive output turns smoothly under load
- Plug and pins clean and intact
- Set the park position on install
- Related Infiniti wiper listings: See our QX30 Front Wiper Motor, QX4 Wiper Linkage, and Q70 Wiper Arm listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2010 Toyota Corolla applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2010 Toyota Corolla (compact sedan)
- Engine variants: 1.8L (base, OEM 27060-0R010) or 2.4L (Corolla XRS variant, output may differ)
- Engine and OEM part number verification required
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for Audi A4 applications (1996+ US market)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: Audi A4 (compact executive sedan / Avant wagon) - year and engine confirmation by VIN
- Engine variants: 1.8T (turbocharged inline-4) or 2.8 V6 (naturally aspirated V6)
- Output and pulley vary by engine variant - verify at order
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
Ford Taurus Rear Lower Valance for Sale | Rear Apron Panel
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used rear lower valance / rear lower apron panel, integrity assessed, mounting points inspected, finish condition documented per unit
- Availability: In stock for 2000 Ford Taurus applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on exterior body components
- Application: 2000 Ford Taurus (Sedan or Wagon body style)
- Finish options: Primered (gray primer, sand and paint) or textured (matte, factory black or paint)
- Body style verification required: Sedan or Wagon (wagon rear panel shape differs)
- Factory mounting points for standard installation
- Related Ford listings: See our Ford Torino Rear Window Defogger, Ford Ranchero Rear Gate, and Ford Thunderbird Trailing Arm listings
- 15 day replacement warranty on component defects
Ford F100 Rocker Moulding for Sale | Lower Body Trim Classic
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used lower body rocker panel trim, integrity assessed, finish condition inspected, mounting features documented per unit
- Availability: In stock for 1961 Ford F100 applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on classic vehicle trim components
- Application: 1961 Ford F100 (classic cab, third-generation F-Series pickup)
- Finish options: Polished (bright mirror-like) or brushed (satin grain, factory-style)
- Side options: Driver, passenger, or pair
- Deep classic vehicle disclosure applies (approximately 65+ years old)
- Related Ford classic listings: See our Ford Torino Rear Window Defogger, Ford Ranchero Rear Gate, and Ford Thunderbird Trailing Arm listings
- 15 day replacement warranty on component defects
