Infiniti Q60 Windshield Washer Reservoir for Sale | OEM Used Plastic Washer

Description

About the Infiniti Q60 Windshield Washer Reservoir

Looking for a replacement Infiniti Q60 windshield washer reservoir / plastic washer fluid tank? Part Nests sources OEM used washer fluid reservoirs with mounting for Infiniti Q60 luxury sport coupe applications. The Infiniti Q60 has a distinctive two-era production history that is important for parts sourcing: 1st gen 2014-2015 (a brief 2-year continuation as a rebadged Infiniti G37 coupe during Infiniti’s naming reorganization from 2013+; the Q60 name was applied to the outgoing G37 coupe for the 2014-2015 model years while the all-new 2nd gen was in development), production gap 2016 (no US Q60 for the 2016 model year), 2nd gen 2017-2022 (all-new design 6-year run based on the Q50 sedan FM platform – this is the MAJOR Q60 era for most customers). The 2nd gen Q60 platform is built on the Nissan FM (Front Midship) architecture same as the Q50 sedan and Nissan 370Z sports car; engine mounted behind front axle centerline for improved weight distribution and handling. Q60 positioning: premium sport coupe (2-door luxury coupe segment) targeting BMW 4-Series, Mercedes-Benz C-Class Coupe, Audi A5, Lexus RC, Cadillac ATS Coupe buyers. 2nd gen engines: 3.0L VR30DDTT twin-turbo V6 shared with Q50 (300 HP standard and 400 HP Red Sport variant). Washer reservoir is a plastic fluid tank that holds windshield washer fluid; typically mounted in the engine bay with electric washer pump motor attached. Call (855) 634-4447 to verify your Q60 generation and year (1st gen 2014-2015 vs 2nd gen 2017-2022) before ordering.

Infiniti Q60 Two Production Eras

• 1st gen 2014-2015 (rebadged G37 coupe continuation): Brief 2-year continuation of the outgoing Infiniti G37 coupe under the new Q60 name; part of Infiniti’s naming reorganization 2013+. The G37 coupe was renamed Q60 for 2014-2015 while Infiniti developed the all-new 2nd gen Q60. Same G37 coupe underneath – VQ37 3.7L V6, same platform, same body – just new Q60 badging. Enthusiast market considers this a transitional / bridge era rather than a “true” Q60
• Production gap 2016: No US Q60 for the 2016 model year while the all-new 2nd gen was being finalized for launch. Existing Q60 owners had to wait for the all-new 2017 model
• 2nd gen 2017-2022 (all-new design – MAJOR Q60 era): All-new Q60 coupe launched 2017 for the 2017 model year; 6-year production run through 2022. Built on the Q50 sedan FM platform – a proper 2-door coupe version of the Q50 sedan platform. Aggressive coupe styling, all-new interior, and modern powertrains. This is what most customers mean when they say “Q60”
• Q60 discontinuation: Infiniti discontinued the Q60 after 2022 as part of the broader industry decline in luxury 2-door coupe demand (customers shifted to luxury crossovers / SUVs); the Q60 was one of the last Japanese luxury sport coupes remaining in the US market

2nd Gen Q60 Platform – Nissan FM (Front Midship)

• Nissan FM (Front Midship) platform: 2nd gen Q60 (2017-2022) shares the FM platform with the Infiniti Q50 sedan and Nissan 370Z sports car; the FM platform was originally developed for the Nissan 350Z / 370Z sports car applications
• Engine positioning: Engine mounted behind the front axle centerline for improved weight distribution (approaching 50/50 front-rear balance) and better handling dynamics; a sports-car-derived platform choice that supports the Q60’s sport coupe positioning
• Coupe body proportions: Long hood, short deck, aggressive stance characteristic of luxury sport coupes; distinct from Q50 sedan proportions despite shared platform
• Drivetrain: RWD standard, AWD available (same as Q50)
• Transmission: 7-speed automatic (same as Q50; no manual option – enthusiast criticism)

2nd Gen Q60 Engine Variants

• 3.0L VR30DDTT twin-turbo V6 (300 HP standard): Nissan’s twin-turbocharged 3.0-liter V6 shared with Q50 and Nissan 400Z (2023+). Standard trim output; adequate performance for luxury coupe positioning
• 3.0L VR30DDTT twin-turbo V6 (400 HP Red Sport 400): Higher-output tune of the same engine; the Q60 Red Sport 400 was the performance flagship; competed with BMW M4 (lower class), Mercedes-AMG C43 Coupe, Audi S5
• 2.0L Mercedes-sourced turbo I4 (early years): Some Q60 model years offered the 2.0L Mercedes-sourced turbo I4 (M274 engine family) during the Nissan-Mercedes partnership era – shared with Q50
• Note – 1st gen 2014-2015 uses G37 engines: 1st gen Q60 (rebadged G37) used the 3.7L VQ37 V6 – different engine from 2nd gen; parts including engine bay components (like washer reservoir) may differ significantly between 1st gen and 2nd gen

Windshield Washer Reservoir Specifications

• Type: OEM plastic windshield washer fluid tank / reservoir for Infiniti Q60
• Function: Plastic fluid tank that stores windshield washer fluid; typically mounted in engine bay with electric washer pump motor attached; provides fluid supply for windshield washer system
• Construction: Molded plastic tank with fill neck, mounting brackets / tabs, cap with vent, motor / pump mounting boss on the tank body; fluid level sensor may be integrated (depending on year / trim)
• Capacity: Typically 1.5-2.5 liters (varies by year and configuration)
• Application: Infiniti Q60 – CRITICAL: specify 1st gen 2014-2015 (G37-based) or 2nd gen 2017-2022 (all-new Q50 FM platform) when ordering; parts are NOT necessarily cross-compatible between generations

Common Windshield Washer Reservoir Failures

• Common failure modes: Tank cracks (plastic embrittlement from age / heat / UV exposure – especially at mounting brackets and fill neck), fluid leakage from cracks or seams, cap seal failure (fluid evaporation / air entry), motor mounting boss failure (motor separates from tank), mounting bracket failure (tank shifts in engine bay)
• Symptoms requiring replacement: Visible fluid leak from tank area, low washer fluid level despite recent refill (fluid escaping), motor separated from tank, tank visibly cracked or damaged, mounting bracket broken causing tank to shift
• Replacement consideration: Drain fluid before removal; disconnect motor electrical and washer hose; unbolt / unclip tank from mounting brackets; install replacement; refill with washer fluid; test washer function. Often replaced along with washer motor if motor is also failing (motor + reservoir replacement together)

Cross-Generation and Cross-Model Compatibility

• 1st gen (2014-2015) vs 2nd gen (2017-2022) NOT necessarily cross-compatible: 1st gen Q60 was rebadged G37 with G37-era washer reservoir design; 2nd gen Q60 is Q50 FM platform-based with newer washer reservoir design. Specify generation clearly when ordering
• 2nd gen Q60 (2017-2022) may cross-reference with Q50 sedan: Because 2nd gen Q60 shares the Q50 FM platform, many engine bay components including washer reservoir may cross-reference between 2nd gen Q60 and same-year Q50; verify specific application
• 1st gen Q60 (2014-2015) may cross-reference with G37 coupe: Because 1st gen Q60 was rebadged G37 coupe, many components including washer reservoir may cross-reference with 2008-2013 G37 coupe; verify specific application
• Customer clarification critical: Q60 generation (1st vs 2nd) and year must be confirmed before ordering

Infiniti Brand Cluster Context

The Infiniti Q60 Windshield Washer Reservoir (this listing) is one of three Infiniti brand listings:

• Infiniti Q50 Windshield Washer Motor (2014-current luxury sport sedan; successor to G37; sedan version of Q60)
• This listing: Infiniti Q60 Windshield Washer Reservoir (Q60 coupe two eras: 2014-2015 G37 continuation, 2017-2022 all-new on Q50 FM platform)
• Infiniti G35 Wheelchair Ramp (CRITICAL PART MISMATCH – G35 is luxury sport sedan / coupe 2003-2007; no factory wheelchair ramp)

All three Infiniti listings are related through the Nissan FM (Front Midship) platform lineage: G35 (2003-2007) → G37 (2008-2013) → 1st gen Q60 (2014-2015 G37-based) → 2nd gen Q60 (2017-2022 Q50 FM-based) and Q50 sedan (2014+). Two of the three listings involve windshield washer components (motor + reservoir this listing) – the windshield washer system is a common Infiniti FM platform theme in and these components are frequently replaced together. Call (855) 634-4447 for application verification across the Infiniti cluster.

Vehicle Compatibility

Why Buy From Part Nests

• Part verified as OEM plastic washer fluid tank / reservoir with mounting for Infiniti Q60 luxury sport coupe applications
• Q60 has distinctive TWO PRODUCTION ERAS: 1st gen 2014-2015 (brief 2-year rebadged G37 continuation during Infiniti Q-series naming reorganization), production gap 2016, 2nd gen 2017-2022 (all-new 6-year design based on Q50 FM platform – MAJOR Q60 era)
• 2nd gen Q60 platform: Nissan FM (Front Midship) same as Q50 sedan and Nissan 370Z
• Infiniti brand heritage: Nissan’s luxury division established 1989 (Japanese premium trio with Lexus and Acura)
• Q60 positioning: premium sport coupe targeting BMW 4-Series, Mercedes C-Class Coupe, Audi A5, Lexus RC, Cadillac ATS Coupe
• 2nd gen engines: 3.0L VR30DDTT twin-turbo V6 (300 / 400 HP Red Sport), 2.0L Mercedes turbo I4 (early years)
• 1st gen (2014-2015) uses G37 3.7L VQ37 V6
• Q60 discontinued after 2022 (industry decline in luxury 2-door coupes; customer shift to SUVs / crossovers)
• Tank integrity verified, mounting brackets confirmed, cap seal inspected
• CRITICAL: 1st gen vs 2nd gen NOT necessarily cross-compatible; specify generation and year
• Cross-reference: 2nd gen Q60 may cross-ref with Q50 sedan; 1st gen Q60 may cross-ref with G37 coupe
• Infiniti cluster context: this is one of three Infiniti brand listings in (all Nissan FM platform sisters; two washer components motor + reservoir this listing)
• Free shipping to all 50 states
• 15 day replacement warranty on component defects
• Infiniti Q60 two-era history and Nissan FM platform lineage knowledge from our support team
• Call (855) 634-4447 to verify the right part for your vehicle before ordering.