Toyota 1KD-FTV Engine for Sale | OEM Used Toyota 1KD-FTV 3.0 Liter D-4D Common
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, compression and leak-down tested all 4 cylinders
- Availability: In stock, Toyota 1KD-FTV 3.0L D-4D common rail diesel engine available
- Shipping: Free shipping to all 50 states via heavy freight, 7 to 14 business days
- Engine verified as Toyota 1KD-FTV (3.0L D-4D common rail diesel turbo inline-4)
- Year confirmed (1KD-FTV production approximately 2001-2015 plus across global markets)
- Application confirmed (Toyota Hilux global diesel, Land Cruiser Prado, Fortuner, Land Cruiser 70 Series, Hiace some markets)
- Horsepower rating documented (170 HP at 3,400 RPM, 251-310 lb-ft torque depending on year and emissions tune)
- Compression and leak-down tested all 4 cylinders
- Cylinder head condition documented (aluminum DOHC 16-valve diesel head)
- D-4D common rail diesel injection system documented (electronic high-pressure direct injection)
- Variable geometry turbocharger documented
- Timing belt condition assessed (1KD-FTV uses timing belt service critical at 60,000-90,000 mile intervals)
- NOTE: Diesel engine; primarily used in Toyota global markets; verify US emissions compliance before installation
- 15 day replacement warranty on internal defects
Recently Viewed Products
Jeep XJ Fender Flares for Sale | OEM Used Authentic Cherokee XJ Fender Flares
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, structural integrity verified, mounting features inspected, surface condition documented
- Availability: In stock, Jeep XJ fender flares available
- Shipping: Specialty shipping to all 50 states (fender flare sets require careful packaging), 5 to 10 business days
- Part verified as authentic Cherokee XJ fender flares for 1984-2001 Cherokee XJ applications
- Application: Jeep Cherokee XJ compact SUV (1984-2001 production - long 17-year production run; AMC era 1984-1987 then Chrysler era 1987-2001)
- Structural integrity verified (no cracks, no broken mounting points, no impact damage)
- Mounting features inspected (retention clip points, hardware holes, body alignment features)
- Surface condition documented (color match, any UV fading, paint condition where painted)
- Edge condition documented (no major chipping, no broken edges)
- Set completeness verified (specify full set of 4 or specific corners when ordering)
- Unibody Jeep design note: XJ Cherokee was unusual for Jeep in using unibody construction (most Jeep models use body-on-frame); this affects fender flare design vs body-on-frame Wrangler
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V solenoid, electrical function tested, connector integrity verified, mounting hardware inspected
- Availability: In stock for Nissan 300ZX Z31 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Nissan 300ZX Z31 chassis (1984-1989 US market) - Nissan's Z-car sport coupe on the Z31 chassis (third-generation Nissan Z-car)
- 12V solenoid: Standard 12V solenoid application in the Nissan 300ZX Z31 electrical system
- Application matched by part number: Solenoid matched to your specific 300ZX application by part number verification
- Z31 direct application: Direct application for Z31 300ZX 1984-1989 US market
- Z32 300ZX (1990-1996) cross-reference: Different generation - confirmed by part number only for Z32 applications
- VG30E and VG30ET Turbo: Most solenoids shared between VG30E naturally aspirated and VG30ET Turbo trims per the source data - verify by VIN or part number
- Predecessor: Nissan 280ZX S130 (1979-1983 - see our related 280ZX rack and pinion listing)
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used factory alloy or steel wheel, integrity assessed, mounting surface inspected, finish condition documented per unit
- Availability: In stock for 2020 and newer Hyundai Venue applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wheel components
- Application: 2020 and newer Hyundai Venue (subcompact CUV / crossover)
- Wheel size options: 15, 16, or 17 inch (verify diameter and width)
- Bolt pattern: 4x100mm (verify at order)
- Finish options: Painted (matte black or color-matched), machined (two-tone), or gunmetar (darker gray)
- Tire mounting and balancing by tire shop required
- TPMS sensor transfer or new sensor required
- Related Hyundai listings: See our Hyundai Kona Electric Uniside, Hyundai Accent Trim Ring, and Hyundai Azera Trunk Lid Pull Down Motor listings
- 15 day replacement warranty on component defects
