At a Glance
- Condition: OEM used lamp wiring harness, continuity tested end to end on lighting circuits, pins inspected, loom integrity documented per unit
- Availability: In stock for Infiniti QX80 (2014+) and QX56 (2011-2013) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Infiniti QX80 (full-size luxury SUV; renamed from QX56 in 2014) - lighting wiring loom
- Year and lighting package verification required
- Continuity end to end on the lighting circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Bulbs, lamp assemblies, modules, and other looms (unless ordered)
- Qualified technician required for correct lighting connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used auxiliary wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Amigo miscellaneous wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Amigo (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- No year on the live page - match by VIN or OEM part number
- Continuity end to end, no open or shorted circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Modules, sensors, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used transmission wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Ascender transmission wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Ascender (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Platform: GM midsize (related to GMC Envoy and Chevy TrailBlazer, GMT360 platform)
- Continuity end to end on the transmission circuits
- Connector pins straight, seated, and clean; loom insulation flexible
- Not included: TCM, sensors, solenoids, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V door power window motor, function tested, gear condition assessed, connector integrity inspected
- Availability: In stock for 1989 to 1997 Ford Probe applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on window motor components
- Application: 1989 to 1997 Ford Probe (two-door coupe / hatchback, Mazda MX-6 sibling)
- 12V door power window motor for door glass (not a rear-door part)
- Side verification required (LEFT or RIGHT)
- Year verification required (first-gen 1989-1992 vs second-gen 1993-1997)
- Common failure symptoms: slow glass, stalls / sticks, no response to switch
- Related Ford listings: See our Ford Aerostar Pressure Plate, Ford Contour Quarter Window, and Ford EXP Radiator Overflow Bottle listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V engine wiring harness, continuity end-to-end tested, connector pins inspected, loom insulation assessed
- Availability: In stock for 2014-2016 Cadillac ELR Voltec plug-in hybrid applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring harness components
- Application: 2014 to 2016 Cadillac ELR - Voltec plug-in hybrid (Cadillac's premium version of the Chevy Volt)
- 12V engine wiring harness - engine loom for the internal combustion engine portion of the Voltec PHEV system
- Continuity requirements: End-to-end continuity, no open or shorted circuits
- Connector pin requirements: Pins straight, seated, and clean
- Loom requirements: Insulation flexible, loom intact, no melt or chew
- Qualified hybrid technician required for any high-voltage work near the harness per the source data
- Related electrified vehicle listings: See our Hyundai Ioniq Engine and Land Rover Discovery Sport Engine listings for related PHEV / hybrid context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V solenoid, electrical function tested, connector integrity verified, mounting hardware inspected
- Availability: In stock for Nissan 300ZX Z31 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Nissan 300ZX Z31 chassis (1984-1989 US market) - Nissan's Z-car sport coupe on the Z31 chassis (third-generation Nissan Z-car)
- 12V solenoid: Standard 12V solenoid application in the Nissan 300ZX Z31 electrical system
- Application matched by part number: Solenoid matched to your specific 300ZX application by part number verification
- Z31 direct application: Direct application for Z31 300ZX 1984-1989 US market
- Z32 300ZX (1990-1996) cross-reference: Different generation - confirmed by part number only for Z32 applications
- VG30E and VG30ET Turbo: Most solenoids shared between VG30E naturally aspirated and VG30ET Turbo trims per the source data - verify by VIN or part number
- Predecessor: Nissan 280ZX S130 (1979-1983 - see our related 280ZX rack and pinion listing)
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used, sensor output tested, connector pin integrity verified, mounting hardware inspected
- Availability: In stock across later Mercury Cougar model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Mercury Cougar 1999-2002 US market (modern Cougar generation with electronic throttle) - pedal position sensor applies to drive-by-wire electronic throttle applications
- Pedal position sensor: measures accelerator pedal position and sends signal to engine control module for drive-by-wire electronic throttle control
- Modern Cougar (1999-2002) was a front-wheel drive sport coupe on the Ford CDW27 platform - completely different from the earlier rear-wheel drive classic Cougar generations (1967-1997)
- Classic Mercury Cougar (1967-1997) used mechanical throttle linkage and does not use pedal position sensors - verify Cougar generation before ordering
- Engine: 2.5L Duratec 25 V6 (base) and 2.0L Zetec I4 (in some markets)
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, connector integrity verified, wire insulation inspected, ground point condition assessed
- Availability: In stock for classic VW Cabriolet restoration
- Shipping: Free shipping to all 50 states, 5 to 10 business days on classic vehicle applications
- Application: Volkswagen Cabriolet 1980-1993 - MK1 Rabbit Cabriolet convertible built by Karmann in Germany
- Body: Two-door convertible with power soft top and rigid roll bar (targa-style structural bar) for open-air motoring safety
- Based on the VW Rabbit / Golf MK1 platform, produced by Karmann coachbuilder in Osnabruck, Germany
- Karmann heritage: same coachbuilder that produced the iconic Karmann Ghia (1955-1974) and various Volkswagen convertible variants
- Engines: 1.5L / 1.6L / 1.7L / 1.8L I4 (variants across the 14-year production run)
- Continued in production long after the MK1 Rabbit/Golf ended - the Cabriolet remained the MK1 convertible through 1993
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used, pivot integrity verified, mounting hardware inspected, structural integrity confirmed
- Availability: In stock - specify LTD era when ordering
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- The Ford LTD nameplate spans multiple platforms across decades - customer specification of the specific era is critical for correct hinge fit
- Coverage: Original LTD full-size (1965-1978), LTD II (1977-1979), LTD mid-size Fox-body (1979-1986), LTD Crown Victoria (1980-1991), Crown Victoria (1992-2011)
- The LTD II and Fox-body mid-size LTD use different hinges than the full-size LTD variants
- The LTD Crown Victoria and Crown Victoria often share Panther-platform hinges with the original LTD full-size
- Position variants: upper and lower hinges, driver and passenger side, front and rear doors
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, mechanism function verified, mounting integrity confirmed, glass channel inspected
- Availability: In stock, limited supply due to short production run
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Ford LTD II mid-size car (1977-1979, brief three-year US production)
- The LTD II replaced the discontinued Ford Torino using the outgoing Torino platform with updated LTD-styled bodywork
- Filled the brief gap between Torino discontinuation and Ford's 1979 downsizing of the full-size LTD
- Body-on-frame mid-size construction, V8-only engines (302 and 351)
- Body styles: four-door sedan (this application), two-door coupe (Brougham/S), station wagon
- Different from the full-size LTD, the Fox-body mid-size LTD, and the LTD Crown Victoria - specify LTD II when ordering
- 15 day replacement warranty on component defects
Audi A8 A/C Wiring Harness for Sale | OEM Used Air Conditioning Harness for A8 Flagship Sedan and S8
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, electrical continuity tested before shipping
- Availability: In stock for Audi A8 D2 and D3 chassis (and matching S8)
- Shipping: Free shipping to all 50 states via carrier delivery
- Electrical continuity tested on every wire
- Insulation integrity inspected (no damaged or burned insulation)
- Connector pins verified (no corrosion, no bent pins)
- Shielding continuity checked where applicable
- No shorts between wires (insulation resistance verified)
- Color-code verified to OEM specification
- 125 degree Celsius insulation rating for engine bay heat
- Chassis disambiguation provided (D2/D3/D4/D5 distinction)
- No core charge required
- Backed by a 15 day replacement warranty against operational defects
Infiniti QX70 Engine Wiring Harness for Sale | OEM Used 3.7L V6 Engine Loom
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, end-to-end continuity tested before shipping
- Availability: In stock, ready to ship
- Shipping: Free shipping to all 50 states, fast transit
- For Infiniti QX70 (2014 to 2017), confirm by VIN
- Part type: engine wiring harness (loom)
- Material: copper wiring with heat-resistant PVC or Teflon insulation
- Connectors: corrosion-resistant OEM-style
- Voltage: 12V
- Engine: primarily the 3.7L V6, confirm by VIN
- No core charge required
- Backed by a 15 day replacement warranty against operational defects
About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA











