On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2001 Honda Civic and related applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2001-2005 Honda Civic (seventh-generation Civic, EM/ES chassis)
- Specification: 70 Amp output, 12 Volt, 6-groove serpentine pulley
- Engine variants: 1.7L D17 (mainstream trims) or 2.0L K20 (Si variant, 2002-2005)
- Amperage match for your trim required
- Not included: Belt, tensioner, and mounting hardware unless confirmed at order
- Basic hand tools, serpentine belt tool, multimeter to verify charging after install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for 2010 Toyota Corolla applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: 2010 Toyota Corolla (compact sedan)
- Engine variants: 1.8L (base, OEM 27060-0R010) or 2.4L (Corolla XRS variant, output may differ)
- Engine and OEM part number verification required
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V alternator, bench charge tested, bearing spin verified, connector inspected per unit
- Availability: In stock for Audi A4 applications (1996+ US market)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on charging components
- Application: Audi A4 (compact executive sedan / Avant wagon) - year and engine confirmation by VIN
- Engine variants: 1.8T (turbocharged inline-4) or 2.8 V6 (naturally aspirated V6)
- Output and pulley vary by engine variant - verify at order
- Charges to spec on the bench; bearing spins smooth and quiet, no play
- Plug and stud terminals clean and sound
- Check belt condition during install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used axle flange, integrity assessed, spline condition inspected, mounting features documented per unit
- Availability: In stock for Audi SQ5 8R (2014-2017) and 80A/FY (2018+) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ5 (performance Q5 SUV variant) - 8R gen (2014-2017) or 80A/FY gen (2018+)
- Generation verification required by VIN (8R = first-gen, 80A/FY = second-gen)
- Drivetrain match required (verify against your axle and drivetrain)
- Side and spline match verification required
- Drivetrain tools and qualified installer required
- Related Audi listings: See our Audi S7 Axle Beam Front listing
- 15 day replacement warranty on component defects
Chevy Pickup Front Axle Shaft for Sale | 4WD 1973-1991 Truck
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used front axle shaft, integrity assessed, spline condition inspected, flange documented per unit
- Availability: In stock for 1973-1991 4WD Chevy Pickup / Blazer K5 / GMC Jimmy applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 1973-1991 Chevy Pickup (Blazer K5, GMC Jimmy) - 4WD only
- CRITICAL: Front axle shaft is inherently a 4WD-only part (not 2WD)
- Spline / Flange: 6-bolt flange, 33-spline output
- VIN verification required for year, drivetrain, and spline / flange match
- Front-axle service tools + qualified installer required
- Related classic GM truck listings available
- 15 day replacement warranty on component defects
Ford Transit Connect Ring and Pinion | Differential Gear Set
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used matched ring gear and pinion gear set, gear condition assessed, pattern documented per unit
- Availability: In stock for 2010 Ford Transit Connect applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 2010 Ford Transit Connect (compact commercial van)
- Ratio options: 3.73 (fuel economy / highway), 4.10 (balanced everyday), or 4.56 (towing / acceleration)
- Ratio-specific - verify at order
- CRITICAL: This is a precision install requiring dial indicator, inch-pound torque wrench, bearing puller and press, gear setup expertise
- Setup kit sold separately (bearings, crush sleeve, shims, carrier, seals, gear oil not included)
- Related Ford listings: See our Ford Transit 250 Receiver Drier, Ford Aerostar Pressure Plate, and Ford Ranchero Rear Gate listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, output amperage tested at rated RPM, voltage regulator verified, brush wear inspected
- Availability: In stock for LS500 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Lexus LS500 XF50 chassis 2018+ US market - fifth-generation Lexus LS full-size flagship sedan (successor to the LS460)
- Output rating: 150-180 amperes rated output appropriate for the LS500 electrical load requirements
- Twin-turbo V6 application: Fits the Lexus LS500 V35A-FTS 3.5L twin-turbo V6 engine - significant powertrain change from the LS460 V8 predecessor
- Related to the Lexus LS lineage: see our related LS460 radiator listing for the LS460 predecessor context
- Different powertrain: The LS500 twin-turbo V6 approach represents a significant departure from the traditional V8 flagship sedan powertrain approach
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, torque vectoring clutch function tested, ring and pinion engagement verified, output shaft splines inspected
- Availability: In stock for Juke AWD applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on differential assemblies
- Application: Nissan Juke 2011-2017 US market - Nissan's distinctive small crossover with polarizing styling
- Torque vectoring AWD rear differential: sophisticated all-wheel drive rear differential with active torque distribution between left and right rear wheels for enhanced handling
- AWD applies to Juke AWD variants only - FWD Juke variants do not have a rear differential
- Juke was Nissan's polarizing entry into the subcompact crossover segment - either loved or disliked, no middle ground
- Discontinued in US market after 2017 - Juke was replaced in Nissan's US lineup by the Nissan Kicks (although Kicks and Juke are different vehicles with different positioning)
- Related Nissan crossovers: Qashqai / Rogue Sport (see our related Qashqai master cylinder and Rogue Sport power steering pump listings)
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, gear engagement tested, LSD function verified, output shaft splines inspected
- Availability: In stock for G8 applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on differential assemblies
- Application: Pontiac G8 2008-2009 US market - Pontiac's rear-wheel drive V8 performance sedan (Australian Holden Commodore rebadge)
- Limited slip rear differential: locks both rear wheels together under acceleration for improved traction and cornering performance
- Australian Holden Commodore rebadge: The Pontiac G8 was a rebadged Australian Holden Commodore VE (2006-2013 Australia) with US-market Pontiac badging and minor variations
- Zeta platform: The G8 uses GM's Zeta rear-wheel drive platform - shared with Australian Holden Commodore VE, later Chevrolet Camaro (5th gen 2010-2015), and various other GM Zeta applications
- Powertrain options: L76 6.0L V8 (G8 GT, ~361 HP), LS3 6.2L V8 (G8 GXP, ~415 HP), LY7 3.6L V6 (base G8)
- Pontiac brand end (2010): The G8 was among the final Pontiac vehicles - produced only 2008-2009 before Pontiac brand discontinuation and GM's early cancellation of G8 production
- 15 day replacement warranty on component defects
About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA
© 2026 Part Nests. All rights reserved.
