At a Glance
- Condition: OEM used SRS airbag, never deployed, inflator intact and unactivated, module ID documented per unit
- Availability: In stock for Land Rover Defender L663 applications (2020+)
- Shipping: Free shipping to all 50 states (hazmat / pyrotechnic-compliant), 5 to 10 business days
- Application: Land Rover Defender L663 (2020+ modern Defender)
- Type: Steering-wheel (driver) airbag per live spec; may also be passenger, curtain, or knee - confirm by VIN
- NHTSA recall status: Not on an active NHTSA recall
- CRITICAL: Classic Defender is a different vehicle - do NOT assume cross-fit
- SAFETY-CRITICAL SRS pyrotechnic device - qualified handling required
- Not included: SRS control module, clockspring, wiring, connectors, mounting hardware unless confirmed at order
- Professional SRS service ONLY: battery disconnect + standby + diagnostic tool for SRS reset / VIN coding
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used clockspring, continuity tested, spiral cable inspected, connector condition documented per unit
- Availability: In stock for BMW i8 Coupe (2014-2020) and Roadster applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on SRS components
- Application: BMW i8 (hybrid supercar) - SRS spiral cable clockspring
- Part number verification required
- CRITICAL: SRS reset required after install with BMW-capable diagnostic tool
- Applies to i8 Coupe (2014-2020) and i8 Roadster (later years)
- Not included: Steering wheel, airbag, column switches, and trim unless confirmed at order
- Professional installer required for airbag reset and code clear
- SRS airbag system component - safety-critical part
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used headlight, function tested, bulb type verified, DOT/SAE compliance confirmed per unit
- Availability: In stock for 2013-2015 Nissan Altima L33 pre-facelift applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on lighting components
- Application: 2013-2015 Nissan Altima (L33 pre-facelift sedan)
- Part options: Assembly or bulbs; left, right, or pair
- Bulb setup: Halogen (standard), LED, or HID (upgrades); DOT/SAE compliant
- CRITICAL: NOT compatible with 2016-2018 facelift (different headlight design)
- Not included: bulbs, ballasts, mounting hardware unless confirmed at order
- Headlight aiming required after fitting
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used lamp wiring harness, continuity tested end to end on lighting circuits, pins inspected, loom integrity documented per unit
- Availability: In stock for Infiniti QX80 (2014+) and QX56 (2011-2013) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Infiniti QX80 (full-size luxury SUV; renamed from QX56 in 2014) - lighting wiring loom
- Year and lighting package verification required
- Continuity end to end on the lighting circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Bulbs, lamp assemblies, modules, and other looms (unless ordered)
- Qualified technician required for correct lighting connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used auxiliary wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Amigo miscellaneous wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Amigo (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- No year on the live page - match by VIN or OEM part number
- Continuity end to end, no open or shorted circuits
- Connector pins straight, seated, and clean
- Loom insulation flexible, loom intact, no melt or chew
- Not included: Modules, sensors, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used transmission wiring harness, continuity tested end to end, pins inspected, loom integrity documented per unit
- Availability: In stock for Ascender transmission wiring harness applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wiring components
- Application: Ascender (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Platform: GM midsize (related to GMC Envoy and Chevy TrailBlazer, GMT360 platform)
- Continuity end to end on the transmission circuits
- Connector pins straight, seated, and clean; loom insulation flexible
- Not included: TCM, sensors, solenoids, and other looms (unless ordered)
- Qualified technician required for correct connector routing
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used axle flange, integrity assessed, spline condition inspected, mounting features documented per unit
- Availability: In stock for Audi SQ5 8R (2014-2017) and 80A/FY (2018+) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ5 (performance Q5 SUV variant) - 8R gen (2014-2017) or 80A/FY gen (2018+)
- Generation verification required by VIN (8R = first-gen, 80A/FY = second-gen)
- Drivetrain match required (verify against your axle and drivetrain)
- Side and spline match verification required
- Drivetrain tools and qualified installer required
- Related Audi listings: See our Audi S7 Axle Beam Front listing
- 15 day replacement warranty on component defects
Dodge 600 Interior Light for Sale | OEM Dome or Courtesy Lamp
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used interior lamp assembly, function tested, lens condition inspected, wiring documented per unit
- Availability: In stock for 1984-1988 Dodge 600 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on interior electrical components
- Application: 1984-1988 Dodge 600 (K-car era Chrysler mid-size sedan)
- Lamp location options: Dome, courtesy, map, or vanity
- Bulb: Incandescent original (LED optional)
- Photo or VIN verification required for correct lamp location
- Careful handling required for vintage lens tabs
- Related classic Mopar listings: See our Dodge Aspen Interior Trim and Dodge Colt Vista Kick Panels listings
- 15 day replacement warranty on component defects
Chevy Pickup Front Axle Shaft for Sale | 4WD 1973-1991 Truck
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used front axle shaft, integrity assessed, spline condition inspected, flange documented per unit
- Availability: In stock for 1973-1991 4WD Chevy Pickup / Blazer K5 / GMC Jimmy applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 1973-1991 Chevy Pickup (Blazer K5, GMC Jimmy) - 4WD only
- CRITICAL: Front axle shaft is inherently a 4WD-only part (not 2WD)
- Spline / Flange: 6-bolt flange, 33-spline output
- VIN verification required for year, drivetrain, and spline / flange match
- Front-axle service tools + qualified installer required
- Related classic GM truck listings available
- 15 day replacement warranty on component defects
