At a Glance
- Condition: OEM used ECM, connector inspected, module ID documented, condition assessed per unit
- Availability: In stock for Land Rover Freelander applications (Freelander 1 or Freelander 2 / LR2)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on control module components
- Application: Land Rover Freelander 1 (US 2002-2005) or Land Rover Freelander 2 / LR2 (US 2008-2015)
- Engine variants: 1.8L, 2.0L TD4, 2.5L V6 (Freelander 1); 2.2L TD4, 3.2L I6 (Freelander 2 / LR2)
- CRITICAL: Exact part number by VIN - one ECM fits one engine
- Programming: VIN-specific flashing required by specialist
- Security: Immobilizer sync required - NOT plug-and-play
- Not included: Programming service, mounting bracket, connectors, keys unless confirmed at order
- Professional fit and programming; battery disconnect and dealer-level diagnostic tool required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used axle flange, integrity assessed, spline condition inspected, mounting features documented per unit
- Availability: In stock for Audi SQ5 8R (2014-2017) and 80A/FY (2018+) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ5 (performance Q5 SUV variant) - 8R gen (2014-2017) or 80A/FY gen (2018+)
- Generation verification required by VIN (8R = first-gen, 80A/FY = second-gen)
- Drivetrain match required (verify against your axle and drivetrain)
- Side and spline match verification required
- Drivetrain tools and qualified installer required
- Related Audi listings: See our Audi S7 Axle Beam Front listing
- 15 day replacement warranty on component defects
Chevy Pickup Front Axle Shaft for Sale | 4WD 1973-1991 Truck
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used front axle shaft, integrity assessed, spline condition inspected, flange documented per unit
- Availability: In stock for 1973-1991 4WD Chevy Pickup / Blazer K5 / GMC Jimmy applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 1973-1991 Chevy Pickup (Blazer K5, GMC Jimmy) - 4WD only
- CRITICAL: Front axle shaft is inherently a 4WD-only part (not 2WD)
- Spline / Flange: 6-bolt flange, 33-spline output
- VIN verification required for year, drivetrain, and spline / flange match
- Front-axle service tools + qualified installer required
- Related classic GM truck listings available
- 15 day replacement warranty on component defects
Ford Transit Connect Ring and Pinion | Differential Gear Set
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used matched ring gear and pinion gear set, gear condition assessed, pattern documented per unit
- Availability: In stock for 2010 Ford Transit Connect applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 2010 Ford Transit Connect (compact commercial van)
- Ratio options: 3.73 (fuel economy / highway), 4.10 (balanced everyday), or 4.56 (towing / acceleration)
- Ratio-specific - verify at order
- CRITICAL: This is a precision install requiring dial indicator, inch-pound torque wrench, bearing puller and press, gear setup expertise
- Setup kit sold separately (bearings, crush sleeve, shims, carrier, seals, gear oil not included)
- Related Ford listings: See our Ford Transit 250 Receiver Drier, Ford Aerostar Pressure Plate, and Ford Ranchero Rear Gate listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used electric power steering (EPS) motor, function tested, mounting features inspected, connector integrity assessed
- Availability: In stock for modern Fiat 600 EPS motor applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on EPS motor components
- Application: Modern Fiat 600 (600e / Hybrid) EPS motor - NOT the classic 1955 to 1969 car
- System: Electric power steering (EPS) motor
- Mount configuration: Column-mounted or rack-integrated EPS unit
- Coding note: Software coding to the specific vehicle may be required at installation
- Related Fiat listings: See our Fiat 500 Power Steering Cooler listing for related Fiat power steering component context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM-style used rear bumper cover / fascia, structural integrity verified, mounting features inspected, cosmetic condition assessed
- Availability: In stock across Audi S8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi S8 - Audi Sport's S variant of the A8 flagship full-size executive sedan
- Paint-ready: Rear bumper cover ships in paint-ready condition - body shop paint refinishing required to match your specific S8 exterior color code
- A8 platform basis: The S8 is the S variant of the A8 - see our related Audi A8 Power Steering Pump listing for the A8 platform context (D3 / D4 / D5 platform generations)
- Related Audi S / RS lineup: See our Audi S7 Front Bumper Cover, Audi RS5 Air Bag, and Audi RS e-tron GT Instrument Cluster listings for related Audi S / RS heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM-style used front bumper cover / fascia, structural integrity verified, mounting features inspected, cosmetic condition assessed
- Availability: In stock across Audi S7 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi S7 - Audi Sport's S variant of the A7 sportback / premium 4-door coupe
- Paint-ready: Front bumper cover ships in paint-ready condition - body shop paint refinishing required to match your specific S7 exterior color code
- A7 platform basis: The S7 is the S variant of the A7 - see our related Audi A7 Screen listing for the A7 platform context (MMI 3G/3G+ first-generation A7)
- Related Audi S / RS lineup: See our Audi S8 Rear Bumper Cover, Audi RS5 Air Bag, and Audi RS e-tron GT Instrument Cluster listings for related Audi S / RS heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used cast aluminum power steering pump, hydraulic function verified, pulley integrity assessed, port fittings inspected
- Availability: In stock across Audi A8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi A8 - Audi's flagship full-size executive sedan (Audi's flagship sedan positioning)
- Cast aluminum construction: standard power steering pump material with cast aluminum housing for appropriate structural integrity and thermal management
- 130mm 6-groove pulley: Specific pulley dimensions - 130mm diameter with 6-groove (6-rib) serpentine belt configuration
- D3 / D4 / D5 platform generations: A8 spans multiple Audi flagship platform generations - verify chassis code when ordering
- Related Audi listings: See our Audi A5 master cylinder, A6 tie rod, A7 screen, AllRoad headlight, and A4 AllRoad tail light listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used hardened steel tie rod set (left and right), structural integrity verified, threading condition assessed, ball joint condition inspected
- Availability: In stock across Audi A6 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi A6 - Audi's executive mid-size sedan (Audi's B-segment executive sedan positioning)
- Left and right tie rod set: Complete pair for full front-suspension tie rod replacement
- Hardened steel construction: standard tie rod material with hardened steel providing appropriate strength for suspension steering link applications
- C6 / C7 / C8 platform generations: A6 spans multiple Audi platform generations - verify chassis code when ordering
- Post-installation wheel alignment REQUIRED: Tie rod replacement affects toe alignment - wheel alignment service required after installation
- Related Audi listings: See our Audi A5 master cylinder, A7 screen, A8 power steering pump, AllRoad headlight, and A4 AllRoad tail light listings
- 15 day replacement warranty on component defects
