At a Glance
- Condition: OEM used instrument cluster, display function verified, connector inspected per unit
- Availability: In stock for Land Rover Discovery Sport applications (L550, 2015+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on instrument components
- Application: Land Rover Discovery Sport (L550 chassis, 2015+)
- Configuration verification by VIN: year, market, engine, trim
- Facelift note: 2020+ facelift cluster differs from 2015-2019
- US market: mph configuration
- CRITICAL: Odometer reprogrammed to true mileage by specialist
- CRITICAL: VIN coding and possible immobilizer sync required
- Not included: Cluster bezel, trim, wiring, or programming service unless confirmed at order
- Professional fit and programming: battery disconnect, dash trim removal, diagnostic tool
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used axle flange, integrity assessed, spline condition inspected, mounting features documented per unit
- Availability: In stock for Audi SQ5 8R (2014-2017) and 80A/FY (2018+) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ5 (performance Q5 SUV variant) - 8R gen (2014-2017) or 80A/FY gen (2018+)
- Generation verification required by VIN (8R = first-gen, 80A/FY = second-gen)
- Drivetrain match required (verify against your axle and drivetrain)
- Side and spline match verification required
- Drivetrain tools and qualified installer required
- Related Audi listings: See our Audi S7 Axle Beam Front listing
- 15 day replacement warranty on component defects
Chevy Pickup Front Axle Shaft for Sale | 4WD 1973-1991 Truck
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used front axle shaft, integrity assessed, spline condition inspected, flange documented per unit
- Availability: In stock for 1973-1991 4WD Chevy Pickup / Blazer K5 / GMC Jimmy applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 1973-1991 Chevy Pickup (Blazer K5, GMC Jimmy) - 4WD only
- CRITICAL: Front axle shaft is inherently a 4WD-only part (not 2WD)
- Spline / Flange: 6-bolt flange, 33-spline output
- VIN verification required for year, drivetrain, and spline / flange match
- Front-axle service tools + qualified installer required
- Related classic GM truck listings available
- 15 day replacement warranty on component defects
Ford Transit Connect Ring and Pinion | Differential Gear Set
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used matched ring gear and pinion gear set, gear condition assessed, pattern documented per unit
- Availability: In stock for 2010 Ford Transit Connect applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 2010 Ford Transit Connect (compact commercial van)
- Ratio options: 3.73 (fuel economy / highway), 4.10 (balanced everyday), or 4.56 (towing / acceleration)
- Ratio-specific - verify at order
- CRITICAL: This is a precision install requiring dial indicator, inch-pound torque wrench, bearing puller and press, gear setup expertise
- Setup kit sold separately (bearings, crush sleeve, shims, carrier, seals, gear oil not included)
- Related Ford listings: See our Ford Transit 250 Receiver Drier, Ford Aerostar Pressure Plate, and Ford Ranchero Rear Gate listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used analog tachometer / RPM gauge, function tested, dial condition assessed, connector integrity inspected
- Availability: In stock for 1964 to 1970 GMC Van 1000 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on gauge components
- Application: 1964 to 1970 GMC Van 1000 (classic GMC full-size van)
- Analog RPM gauge with approximately 3.5-inch dial diameter
- 12V system with sender connection compatibility
- Year verification required so the gauge matches the dash configuration
- Classic vehicle disclosure applies
- Related GMC listings: See our GMC Typhoon Turbocharger listing for related GMC vehicle context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used digital TFT instrument cluster, display function verified, connector integrity inspected, mounting features assessed
- Availability: In stock for Audi RS e-tron GT applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi RS e-tron GT - Audi Sport's high-performance electric vehicle (EV) gran turismo
- Digital TFT driver display: OEM digital thin-film transistor display technology for the modern EV driver instrument cluster
- Intended fitment: Audi RS e-tron GT - VIN confirmed at order per the source data (no model year on the source page)
- Non-RS e-tron GT variants: May differ in coding or trim per the live FAQ - verify part number and coding requirements before purchase
- Programming REQUIRED: Component Protection and immobilizer pairing plus feature coding required after install per the source data - dealer-level or qualified specialist programming equipment needed
- Related Audi Sport (RS) listings: See our Audi RS5 Air Bag listing for the related B8-era Audi Sport (RS) performance vehicle heritage
- 15 day replacement warranty on component defects (excluding coding services)
At a Glance
- Condition: OEM used complete ignition lock cylinder assembly, mechanical function tested, key operation verified, switch electrical function tested
- Availability: In stock for Mercury Milan 2006-2011 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Mercury Milan 2006-2011 US market - Mercury's modern mid-size sedan (Ford Fusion twin platform, CD3 platform)
- COMPLETE assembly: Includes ignition lock cylinder, double-edged mechanical key, factory-style key fob, and electrical switch per the source data
- Direct fitment for Milan 2006-2011: No modification required per the source data
- PATS-equipped programming required: Included key and fob must be programmed to the vehicle - PATS (Passive Anti-Theft System) transponder programming at dealership or specialty scan tool required per the live FAQ
- Ford Fusion twin platform: The Mercury Milan and Ford Fusion are platform twins - CD3 platform sedan shared with the Lincoln Zephyr / MKZ luxury sibling
- Related modern Mercury sedan heritage: See our other Mercury listings for the classic Mercury sedan heritage context
- 15 day replacement warranty on component defects (excluding PATS programming)
At a Glance
- Condition: OEM used analog anti-theft immobilizer unit, electrical function tested, connector or pigtail harness integrity verified, mounting features inspected
- Availability: In stock for classic Mercury Grand Marquis and Marquis family applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Mercury Grand Marquis and Marquis family, 1979 and earlier US market - classic Mercury full-size sedan analog ignition applications
- Analog anti-theft interrupt: Vintage-era analog electrical circuit anti-theft interrupt system - fundamentally different from modern electronic PATS (Passive Anti-Theft System) transponder-key systems
- NOT compatible with post-1980 vehicles: Different ignition system architecture post-1980 makes this unit incompatible with 1980+ Grand Marquis / Marquis applications per the source data
- Vintage-style connector: Includes vintage-style connector or pigtail harness appropriate for classic Mercury analog electrical systems
- Panther platform predecessor context: The classic Mercury Grand Marquis was part of Mercury's full-size sedan lineage that later evolved into the famous Panther platform Grand Marquis (1979+, closely related to the Ford Crown Victoria)
- Related classic Mercury: See our related Mercury Monarch gas tank listing for classic Mercury heritage context
- Other vintage analog-ignition vehicle compatibility possible: Call to confirm circuit match for other classic vehicles
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used, torque vectoring clutch function tested, ring and pinion engagement verified, output shaft splines inspected
- Availability: In stock for Juke AWD applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on differential assemblies
- Application: Nissan Juke 2011-2017 US market - Nissan's distinctive small crossover with polarizing styling
- Torque vectoring AWD rear differential: sophisticated all-wheel drive rear differential with active torque distribution between left and right rear wheels for enhanced handling
- AWD applies to Juke AWD variants only - FWD Juke variants do not have a rear differential
- Juke was Nissan's polarizing entry into the subcompact crossover segment - either loved or disliked, no middle ground
- Discontinued in US market after 2017 - Juke was replaced in Nissan's US lineup by the Nissan Kicks (although Kicks and Juke are different vehicles with different positioning)
- Related Nissan crossovers: Qashqai / Rogue Sport (see our related Qashqai master cylinder and Rogue Sport power steering pump listings)
- 15 day replacement warranty on component defects
