On Sale This Week
Get the Right Part at the Right Price for the Comfort of Your Vehicle
Plakrore maheten. Astronens ultranirad. Dod.
At a Glance
- Condition: OEM used SRS airbag, never deployed, inflator intact and unactivated, module ID documented per unit
- Availability: In stock for Land Rover Defender L663 applications (2020+)
- Shipping: Free shipping to all 50 states (hazmat / pyrotechnic-compliant), 5 to 10 business days
- Application: Land Rover Defender L663 (2020+ modern Defender)
- Type: Steering-wheel (driver) airbag per live spec; may also be passenger, curtain, or knee - confirm by VIN
- NHTSA recall status: Not on an active NHTSA recall
- CRITICAL: Classic Defender is a different vehicle - do NOT assume cross-fit
- SAFETY-CRITICAL SRS pyrotechnic device - qualified handling required
- Not included: SRS control module, clockspring, wiring, connectors, mounting hardware unless confirmed at order
- Professional SRS service ONLY: battery disconnect + standby + diagnostic tool for SRS reset / VIN coding
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used clockspring, continuity tested, spiral cable inspected, connector condition documented per unit
- Availability: In stock for BMW i8 Coupe (2014-2020) and Roadster applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on SRS components
- Application: BMW i8 (hybrid supercar) - SRS spiral cable clockspring
- Part number verification required
- CRITICAL: SRS reset required after install with BMW-capable diagnostic tool
- Applies to i8 Coupe (2014-2020) and i8 Roadster (later years)
- Not included: Steering wheel, airbag, column switches, and trim unless confirmed at order
- Professional installer required for airbag reset and code clear
- SRS airbag system component - safety-critical part
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used CV axle half shaft, joint play checked, boots inspected, splines documented per unit
- Availability: In stock for Audi SQ8 applications (2020-2023)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ8 (flagship performance full-size luxury SUV, AWD)
- Year, side, position verification required by VIN
- CV joints smooth, no play, no notchiness
- Boots intact, no tears or thrown grease
- Splines clean and undamaged for a proper seat
- Not included: axle nut, hub, hardware unless ordered
- Correct axle nut torque required; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used yoke and U-joint, joint play checked, bearing caps inspected, yoke integrity documented per unit
- Availability: In stock for Axiom yoke and U-joint applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Axiom (Isuzu nameplate - NOT Infiniti, source-labeled distinction)
- Sizing: Matched by cap diameter and snap-ring style
- No play or notchiness in the U-joint
- Bearing caps and needles in good condition
- Yoke splines and ears straight, no cracks
- Press tools or U-joint service kit, snap-ring pliers, grease required for install
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used front axle beam / subframe, integrity assessed, mounting points inspected, bolt-hole condition documented per unit
- Availability: In stock for Audi S7 C7 4G (2012-2017) and C8 4K (2018-2024) applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on subframe components
- Application: Audi S7 (performance A7 Sportback variant) - C7 4G gen (2012-2017) or C8 4K gen (2018-2024)
- Generation verification required by VIN (C7 4G = first-gen, C8 4K = second-gen)
- Control-arm and subframe bolt point match required
- MLB / MLB Evo platform (Audi's modular longitudinal platform)
- Wheel alignment required after install
- Lift, suspension tools, qualified installer required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used axle flange, integrity assessed, spline condition inspected, mounting features documented per unit
- Availability: In stock for Audi SQ5 8R (2014-2017) and 80A/FY (2018+) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: Audi SQ5 (performance Q5 SUV variant) - 8R gen (2014-2017) or 80A/FY gen (2018+)
- Generation verification required by VIN (8R = first-gen, 80A/FY = second-gen)
- Drivetrain match required (verify against your axle and drivetrain)
- Side and spline match verification required
- Drivetrain tools and qualified installer required
- Related Audi listings: See our Audi S7 Axle Beam Front listing
- 15 day replacement warranty on component defects
Chevy Pickup Front Axle Shaft for Sale | 4WD 1973-1991 Truck
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used front axle shaft, integrity assessed, spline condition inspected, flange documented per unit
- Availability: In stock for 1973-1991 4WD Chevy Pickup / Blazer K5 / GMC Jimmy applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 1973-1991 Chevy Pickup (Blazer K5, GMC Jimmy) - 4WD only
- CRITICAL: Front axle shaft is inherently a 4WD-only part (not 2WD)
- Spline / Flange: 6-bolt flange, 33-spline output
- VIN verification required for year, drivetrain, and spline / flange match
- Front-axle service tools + qualified installer required
- Related classic GM truck listings available
- 15 day replacement warranty on component defects
Ford Transit Connect Ring and Pinion | Differential Gear Set
Rated 4.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used matched ring gear and pinion gear set, gear condition assessed, pattern documented per unit
- Availability: In stock for 2010 Ford Transit Connect applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on driveline components
- Application: 2010 Ford Transit Connect (compact commercial van)
- Ratio options: 3.73 (fuel economy / highway), 4.10 (balanced everyday), or 4.56 (towing / acceleration)
- Ratio-specific - verify at order
- CRITICAL: This is a precision install requiring dial indicator, inch-pound torque wrench, bearing puller and press, gear setup expertise
- Setup kit sold separately (bearings, crush sleeve, shims, carrier, seals, gear oil not included)
- Related Ford listings: See our Ford Transit 250 Receiver Drier, Ford Aerostar Pressure Plate, and Ford Ranchero Rear Gate listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used driver air bag module, NOT deployed, complete cover with Audi rings, inflator, and folded cushion per the source data
- Availability: In stock for Audi RS5 B8 platform applications (donor 2010 per the source data)
- Shipping: Free shipping to all 50 states, 3 to 7 business days (hazmat requirements apply for airbag modules)
- Application: Audi RS5, B8 platform (donor 2010 per the source data) - Audi Sport's highest-performance A5 variant
- OEM driver SRS module: Steering-wheel-mounted driver air bag module
- NOT deployed: Module has not been deployed - standard used SRS module condition for reuse applications
- CRITICAL: Qualified technician installation required: Per the source data, this module must be installed and the SRS lamp reset by a qualified technician with proper diagnostic equipment - NOT an owner-installed component
- US-market RS5 (2013 on): Call with your VIN - the donor is a 2010 European-launch car per the source data
- Recall status verification required: Confirm the module is clear of any open safety recall for your VIN before fitment per the source data
- Related Audi listings: See our Audi A5 Master Cylinder listing for the related A5 platform (RS5 is Audi Sport's highest-performance A5 variant)
- 15 day replacement warranty on component defects (excluding installation labor and SRS reset)
At a Glance
- Condition: OEM used undeployed driver-side airbag module, propellant charge inspected, mounting hardware verified, connector integrity checked
- Availability: In stock for classic Subaru Justy applications
- Shipping: Free shipping to all 50 states, hazmat surcharge may apply on airbag components in some states, 5 to 10 business days
- Application: Subaru Justy - Subaru's classic subcompact vehicle across multiple generations of the small Subaru
- Undeployed condition: The airbag module has not been deployed and is in original condition ready for installation
- Subaru Justy background: Started as Subaru's own subcompact, later Subaru sold rebadged Suzuki Cultus and Daihatsu Sirion variants under the Justy nameplate in some markets
- Discontinued in the US market since 1994; various Justy generations continued in international markets
- Important safety note: Airbag installation should be performed by qualified SRS service personnel following manufacturer safety protocols - improper handling can cause serious injury
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, torque vectoring clutch function tested, ring and pinion engagement verified, output shaft splines inspected
- Availability: In stock for Juke AWD applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on differential assemblies
- Application: Nissan Juke 2011-2017 US market - Nissan's distinctive small crossover with polarizing styling
- Torque vectoring AWD rear differential: sophisticated all-wheel drive rear differential with active torque distribution between left and right rear wheels for enhanced handling
- AWD applies to Juke AWD variants only - FWD Juke variants do not have a rear differential
- Juke was Nissan's polarizing entry into the subcompact crossover segment - either loved or disliked, no middle ground
- Discontinued in US market after 2017 - Juke was replaced in Nissan's US lineup by the Nissan Kicks (although Kicks and Juke are different vehicles with different positioning)
- Related Nissan crossovers: Qashqai / Rogue Sport (see our related Qashqai master cylinder and Rogue Sport power steering pump listings)
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, gear engagement tested, LSD function verified, output shaft splines inspected
- Availability: In stock for G8 applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on differential assemblies
- Application: Pontiac G8 2008-2009 US market - Pontiac's rear-wheel drive V8 performance sedan (Australian Holden Commodore rebadge)
- Limited slip rear differential: locks both rear wheels together under acceleration for improved traction and cornering performance
- Australian Holden Commodore rebadge: The Pontiac G8 was a rebadged Australian Holden Commodore VE (2006-2013 Australia) with US-market Pontiac badging and minor variations
- Zeta platform: The G8 uses GM's Zeta rear-wheel drive platform - shared with Australian Holden Commodore VE, later Chevrolet Camaro (5th gen 2010-2015), and various other GM Zeta applications
- Powertrain options: L76 6.0L V8 (G8 GT, ~361 HP), LS3 6.2L V8 (G8 GXP, ~415 HP), LY7 3.6L V6 (base G8)
- Pontiac brand end (2010): The G8 was among the final Pontiac vehicles - produced only 2008-2009 before Pontiac brand discontinuation and GM's early cancellation of G8 production
- 15 day replacement warranty on component defects
About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA
© 2026 Part Nests. All rights reserved.
