At a Glance
- Condition: OEM used SRS airbag, never deployed, inflator intact and unactivated, module ID documented per unit
- Availability: In stock for Land Rover Defender L663 applications (2020+)
- Shipping: Free shipping to all 50 states (hazmat / pyrotechnic-compliant), 5 to 10 business days
- Application: Land Rover Defender L663 (2020+ modern Defender)
- Type: Steering-wheel (driver) airbag per live spec; may also be passenger, curtain, or knee - confirm by VIN
- NHTSA recall status: Not on an active NHTSA recall
- CRITICAL: Classic Defender is a different vehicle - do NOT assume cross-fit
- SAFETY-CRITICAL SRS pyrotechnic device - qualified handling required
- Not included: SRS control module, clockspring, wiring, connectors, mounting hardware unless confirmed at order
- Professional SRS service ONLY: battery disconnect + standby + diagnostic tool for SRS reset / VIN coding
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used clockspring, continuity tested, spiral cable inspected, connector condition documented per unit
- Availability: In stock for BMW i8 Coupe (2014-2020) and Roadster applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on SRS components
- Application: BMW i8 (hybrid supercar) - SRS spiral cable clockspring
- Part number verification required
- CRITICAL: SRS reset required after install with BMW-capable diagnostic tool
- Applies to i8 Coupe (2014-2020) and i8 Roadster (later years)
- Not included: Steering wheel, airbag, column switches, and trim unless confirmed at order
- Professional installer required for airbag reset and code clear
- SRS airbag system component - safety-critical part
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used engine coolant pump / water pump, function tested, shaft play assessed, weep hole condition inspected
- Availability: In stock for 1996 to 2008 Hyundai Tiburon applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on cooling components
- Application: 1996 to 2008 Hyundai Tiburon (sporty coupe)
- Engine-specific: Four-cylinder Beta engine OR V6 Delta engine (confirm at order)
- Common failure symptoms: Coolant leak at weep hole / gasket, overheating, noise or pulley play
- Fresh pump gasket recommended for any install
- Coolant system bleeding required after install per the source data
- Related Hyundai listings: See our Hyundai Santa Fe Valve Cover, Hyundai Kona Electric Uniside, and Hyundai Ioniq Engine listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used radiator overflow bottle / coolant overflow reservoir, integrity assessed, cap / hose interface inspected, seam condition documented per unit
- Availability: In stock for 1982 to 1988 Ford EXP applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on cooling components
- Application: 1982 to 1988 Ford EXP (Escort-based sporty two-seater)
- Coolant overflow reservoir for leaks, cracks, warping, or low-level scenarios
- Direct fit configuration
- Year verification required so cap and hose interfaces match
- Classic vehicle disclosure applies
- Related Ford listings: See our Ford Aerostar Pressure Plate, Ford Bronco Raptor Quarter Panel, and Ford Contour Quarter Window listings for related Ford lineage context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM-style used rear bumper cover / fascia, structural integrity verified, mounting features inspected, cosmetic condition assessed
- Availability: In stock across Audi S8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi S8 - Audi Sport's S variant of the A8 flagship full-size executive sedan
- Paint-ready: Rear bumper cover ships in paint-ready condition - body shop paint refinishing required to match your specific S8 exterior color code
- A8 platform basis: The S8 is the S variant of the A8 - see our related Audi A8 Power Steering Pump listing for the A8 platform context (D3 / D4 / D5 platform generations)
- Related Audi S / RS lineup: See our Audi S7 Front Bumper Cover, Audi RS5 Air Bag, and Audi RS e-tron GT Instrument Cluster listings for related Audi S / RS heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM-style used front bumper cover / fascia, structural integrity verified, mounting features inspected, cosmetic condition assessed
- Availability: In stock across Audi S7 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi S7 - Audi Sport's S variant of the A7 sportback / premium 4-door coupe
- Paint-ready: Front bumper cover ships in paint-ready condition - body shop paint refinishing required to match your specific S7 exterior color code
- A7 platform basis: The S7 is the S variant of the A7 - see our related Audi A7 Screen listing for the A7 platform context (MMI 3G/3G+ first-generation A7)
- Related Audi S / RS lineup: See our Audi S8 Rear Bumper Cover, Audi RS5 Air Bag, and Audi RS e-tron GT Instrument Cluster listings for related Audi S / RS heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used coolant expansion tank / reservoir, cap seal condition assessed, structural integrity verified, port fittings inspected
- Availability: In stock across Audi Q8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi Q8 - Audi's coupe-style flagship SUV positioning (SQ8 higher-performance variant, RS Q8 highest-performance variant)
- OE coolant expansion tank: Standard cooling system coolant expansion / reservoir tank
- 4M platform (MLB Evo): The Q8 shares 4M / MLB Evo platform with the Audi Q7 (see our related Audi Q7 Water Pump listing) and various other Volkswagen Group premium SUVs
- Related Audi listings: See our Audi Q7 Water Pump and Audi SQ5 Glove Box listings for related Audi SUV heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used driver air bag module, NOT deployed, complete cover with Audi rings, inflator, and folded cushion per the source data
- Availability: In stock for Audi RS5 B8 platform applications (donor 2010 per the source data)
- Shipping: Free shipping to all 50 states, 3 to 7 business days (hazmat requirements apply for airbag modules)
- Application: Audi RS5, B8 platform (donor 2010 per the source data) - Audi Sport's highest-performance A5 variant
- OEM driver SRS module: Steering-wheel-mounted driver air bag module
- NOT deployed: Module has not been deployed - standard used SRS module condition for reuse applications
- CRITICAL: Qualified technician installation required: Per the source data, this module must be installed and the SRS lamp reset by a qualified technician with proper diagnostic equipment - NOT an owner-installed component
- US-market RS5 (2013 on): Call with your VIN - the donor is a 2010 European-launch car per the source data
- Recall status verification required: Confirm the module is clear of any open safety recall for your VIN before fitment per the source data
- Related Audi listings: See our Audi A5 Master Cylinder listing for the related A5 platform (RS5 is Audi Sport's highest-performance A5 variant)
- 15 day replacement warranty on component defects (excluding installation labor and SRS reset)
At a Glance
- Condition: OEM used complete rear bumper assembly, structural integrity verified, mounting brackets inspected, cosmetic condition assessed
- Availability: In stock across Chrysler 200 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Chrysler 200 - Chrysler's mid-size sedan produced across two generations (first-gen 2011-2014, second-gen 2015-2017)
- Complete rear bumper assembly: Rear cover and main assembly for direct rear-end replacement
- Generation matching critical: First-gen Chrysler 200 (2011-2014) and second-gen Chrysler 200 (2015-2017) use different rear bumper assembly configurations
- Chrysler mid-size sedan positioning: Successor to the Chrysler Sebring; positioned in the mid-size sedan segment during the Chrysler / Fiat merger era
- Discontinued 2017: The Chrysler 200 was discontinued after 2017 as Chrysler exited the mid-size sedan segment - Chrysler focused on minivan / SUV positioning
- Body color painting typically required after installation - specify vehicle exterior color code when ordering
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used complete front bumper assembly, structural integrity verified, mounting brackets inspected, cosmetic condition assessed
- Availability: In stock for modern Daihatsu Rocky A200/A250 series applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Daihatsu Rocky A200/A250 series (2019-on) per the source data - modern Daihatsu subcompact SUV / crossover
- Complete assembly: Includes bumper cover, reinforced beam, grille with emblem, and mounting brackets per the source data
- Toyota Raize twin model: The modern Rocky is a twin model with the Toyota Raize - both manufactured by Daihatsu (Toyota-owned subsidiary). Toyota Raize front structure is closely related - call to confirm specific assembly
- NOT for classic Rocky: Earlier Rocky generations (F-series SUVs from the 1980s-1990s) are NOT compatible - different body entirely per the source data
- Fog lights and parking sensors not included per the live FAQ, paint not included
- Modern JDM/Asian-market vehicle: The A200/A250 Rocky is a current-market Daihatsu vehicle sold in Japan and various Asian markets (not sold new in US market)
- Related Daihatsu heritage: See our related Daihatsu Charade Engine and Daihatsu Hijet Transmission listings for classic Daihatsu heritage context
- Two 5-star reviews from verified modern Rocky / Raize owners
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used fan shroud, structural integrity verified, mounting tabs inspected, fan clearance geometry assessed, classic-vehicle disclosure applies
- Availability: In stock for classic Nissan 240SX S13 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Nissan 240SX (S13 chassis) 1989-1994 US market - Nissan's classic sport compact / sport coupe on the legendary S13 chassis
- S13 platform: The Nissan 240SX S13 is one of the most legendary sport compact platforms in Japanese automotive heritage
- OE-fit configuration: Fan shroud configuration matches original equipment for direct replacement fit
- Predecessor: Nissan 200SX S12 (1984-1988 US market) - see our related 200SX ECU listing for the S12 predecessor context
- Successor: Nissan 240SX S14 (1995-1998 US market) - different chassis architecture, different fan shroud configuration
- Classic drift heritage: The S13 240SX became legendary in drift motorsport globally - one of the most influential drift chassis in the drift community
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used thermoplastic fan shroud, structural integrity verified, mounting tabs inspected, fan clearance geometry assessed
- Availability: In stock across Renegade model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Jeep Renegade 2015+ US market - Jeep's subcompact SUV positioned at the entry level of the Jeep lineup
- OE-profile thermoplastic construction: standard fan shroud material with good thermal stability and structural integrity for engine bay applications
- Fiat 500X platform sibling: The Jeep Renegade shares platform architecture with the Fiat 500X - post-Fiat / Chrysler merger platform sharing arrangement
- Engine matching: Different Renegade engine variants use different fan shroud configurations - engine match required at order
- Related Jeep listings: See our Jeep Liberty PCM and Jeep Patriot oil pan listings for related Jeep unibody vehicles
- 15 day replacement warranty on component defects
About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA












