At a Glance
- Condition: OEM used, mechanical operation tested, hydraulic ports inspected, tie rod ends documented
- Availability: In stock, Toyota Tacoma / 4Runner hydraulic power steering rack available
- Shipping: Specialty shipping to all 50 states (steering rack requires careful packaging), 5 to 10 business days
- Part verified as hydraulic power steering rack and pinion assembly for Toyota Tacoma and 4Runner applications
- Application requires Tacoma / 4Runner generation specification (Tacoma: 1st gen 1995-2004, 2nd gen 2005-2015, 3rd gen 2016-2023; 4Runner: 3rd gen 1996-2002, 4th gen 2003-2009, 5th gen 2010-2024) - racks NOT interchangeable between generations or between Tacoma and 4Runner without verification
- Mechanical operation tested (smooth rack travel through full range, no binding, no internal noise)
- Hydraulic ports inspected (no thread damage, proper sealing surface finish)
- Tie rod end condition documented (no excessive play, threads inspected, boots condition noted)
- Pinion shaft inspected (no excessive play, no visible wear at input shaft splines)
- External housing condition documented (no cracks, no impact damage)
- Mounting features verified (Toyota Tacoma / 4Runner specific frame mounting points)
- Hydraulic ports capped during shipping to prevent contamination
- SAFETY CRITICAL component: Steering rack installation requires qualified shop, complete power steering fluid flush, proper bleed procedure, and alignment after installation
- 15 day replacement warranty on component defects
At a Glance
- Listing Type: Identification and alternative parts guidance listing - the Honda Clarity Fuel Cell has NO towing capacity, so "trailer brake controller" does NOT apply to this vehicle
- Availability: Alternative parts sourcing depends on clarified vehicle need
- Shipping: Free shipping to all 50 states (after clarification), 5 to 10 business days
- CRITICAL PART MISMATCH: Trailer brake controllers are electronic devices for vehicles that TOW TRAILERS WITH ELECTRIC BRAKES (pickup trucks, full-size SUVs, medium-duty trucks with tow package). Required for most trailers over 3,000 lbs. Honda Clarity Fuel Cell is a HYDROGEN FCV SEDAN with NO TOWING CAPACITY - no hitch receiver, no brake controller wiring, no tow package available from factory
- Honda Clarity Fuel Cell context: one of Honda's most unique modern vehicles; produced 2017-2021 (5 years US); LEASE-ONLY at $369/month initially; CALIFORNIA-ONLY availability due to hydrogen refueling infrastructure (approximately 50+ hydrogen refueling stations concentrated in California)
- Three Clarity variants offered: Fuel Cell FCV (hydrogen), Electric BEV (89-mile range - very limited), Plug-In Hybrid (extended range with gasoline backup - most successful variant)
- Why no towing: Fuel cell / EV / PHEV sedan architecture does not include a factory tow package; hydrogen tank packaging affects rear-of-vehicle configuration; regenerative braking systems are not compatible with electric trailer brake controllers
- Customer likely means: (1) Different vehicle with trailer package (pickup truck, full-size SUV); (2) Confused with different Honda vehicle (Ridgeline, Pilot, Passport which do offer towing); (3) Misidentified vehicle entirely
- Call (855) 634-4447 to clarify actual vehicle and component need
Honda Acty Torque Converter for Sale | Specialty JDM Used Torque Converter
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: Specialty JDM used, internal function tested, lock-up clutch function evaluated, external condition documented
- Availability: Specialty Japanese import sourcing - 14-30 days typical lead time for JDM-sourced parts
- Shipping: Free shipping to all 50 states (after JDM sourcing lead time), 5 to 10 business days continental US
- Part verified as torque converter for Honda Acty kei truck AUTOMATIC TRANSMISSION variants only (manual Acty does NOT use a torque converter)
- IMPORTANT - NON-US FACTORY MARKET vehicle: The Honda Acty was NEVER sold in the US through Honda factory channels - kei vehicles do not comply with US FMVSS (Federal Motor Vehicle Safety Standards) and EPA requirements at original sale. Available in US ONLY via grey-market import under the 25-year federal rule (currently 1999 and earlier US-eligible)
- Application: Honda Acty kei truck and microvan AUTOMATIC TRANSMISSION variants (1977-2021 worldwide production; US-eligible models are 1999 and earlier per 25-year rule as of current date)
- Internal function tested (torque converter performs proper fluid coupling; no internal damage)
- Lock-up clutch function evaluated (where applicable for variant)
- External condition documented (no impact damage, mounting surfaces inspected)
- JDM (Japanese Domestic Market) sourcing through specialty Japan import channels
- 15 day replacement warranty on component defects
Honda Accord AC Compressor for Sale | OEM Used A/C Compressor with Integrated
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, electric clutch function verified, mechanical operation tested, sealing surfaces documented
- Availability: In stock, Honda Accord AC compressor available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as A/C compressor with integrated electric clutch for Honda Accord applications
- Application requires year, generation, and engine specification (Honda Accord has been produced across many generations - 7th gen 2003-2007 / 8th gen 2008-2012 / 9th gen 2013-2017 / 10th gen 2018-2022 / 11th gen 2023 plus - each with different A/C compressor specifications)
- Engine compatibility note: Specify your Accord engine (K-series I4, J-series V6, or hybrid system) when ordering as compressor specifications vary
- Electric clutch function verified (engagement / disengagement cycle tested)
- Mechanical operation tested (no binding, no unusual noise, free rotation when clutch disengaged)
- Sealing surfaces documented (shaft seal area, port flange areas, no obvious oil contamination)
- Inlet and outlet port flanges inspected (no thread damage, proper sealing surface finish)
- Electrical connector terminals inspected (no corrosion, no bent pins)
- Mounting features verified (Accord specific engine accessory mounting position)
- NOTE: A/C compressor replacement requires complete A/C system service - replace receiver / drier, flush system, professional refrigerant evacuation and recharge with OEM-specified refrigerant
- 15 day replacement warranty on component defects
Honda 600 Tire for Sale | OEM and Aftermarket Tire Identification and Sourcing
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Listing Type: Identification / education listing for "Honda 600" tire products - two distinct possibilities disclosed
- Availability: Sourcing varies by application - vintage Honda N600 / Z600 car tires from specialty vintage tire suppliers; Honda 600cc motorcycle tires from standard motorcycle tire distributors
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- IMPORTANT CLARIFICATION: "Honda 600" is ambiguous and can refer to multiple Honda products. This listing provides identification and sourcing guidance for two distinct possibilities
- Possibility 1: Honda N600 passenger car 1969-1972 (Honda's first US-market passenger car, predecessor to Civic; tiny 2-door with 598cc twin engine; used 12-inch wheels with vintage 5.20-12 bias-ply tires; extremely rare collector vehicle) plus Honda Z600 sports coupe sister vehicle
- Possibility 2: Honda 600cc motorcycle family - CBR600 (sport bike series including CBR600F / CBR600RR), CB600F (Hornet naked bike), VFR600 (sport touring), XR600 / XR600R (off-road / enduro), and other 600cc Honda motorcycle models - completely different product category from cars
- Note: "Tire" as a vehicle-specific product is unusual since tires are typically size-based not vehicle-specific. Customer typically purchases tires by size specification rather than vehicle application
- We help identify the correct tire product and source from appropriate suppliers. Vintage Honda N600 / Z600 tires from specialty vintage tire suppliers (Coker Tire, Lucas Classic Tires). Honda 600cc motorcycle tires from standard motorcycle tire distributors
- Call (855) 634-4447 to clarify needs and discuss sourcing
At a Glance
- Condition: OEM used, spindle machined surfaces inspected, bearing races checked for wear / pitting, mounting flange integrity verified
- Availability: In stock, GMC 3500 spindle available; specify generation and year
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Part verified as OEM front axle spindle for GMC 3500 Series 1-ton heavy duty truck applications
- Application: GMC 3500 Series 1-ton heavy duty truck across multiple production eras - GMT400 1988-2000 (C/K 3500 naming), GMT800 2001-2007 (renamed Sierra 3500 / 3500HD), GMT900 2007-2014 (Sierra 3500HD continuation more refined), K2XX 2014-2018 (Sierra 3500HD modern), T1 2019-current (all-new Sierra 3500HD with AT4 off-road variant and Denali premium trim)
- GMC 3500 positioning: 1-ton heavy duty truck above 2500 (3/4-ton and below 4500 / 5500 medium-duty in GMC's full-size truck hierarchy
- Heaviest consumer GM pickup truck: serves maximum-capability heavy-duty applications including heaviest towing (~14,000+ lbs conventional; up to 30,000+ lbs gooseneck / 5th wheel on modern SRW variants; up to 35,000+ lbs gooseneck / 5th wheel on modern DRW dually variants)
- Applications: heavy commercial fleet, agriculture, construction, RV / horse trailer towing, heavy 5th wheel
- Sister vehicle: Chevrolet 3500 / Silverado 3500HD (identical mechanical vehicle - Chevrolet primary brand, GMC "Professional Grade" sister)
- Competitors: Ford F-350 Super Duty, Ram 3500 HD
- Spindle machined surfaces inspected, bearing races checked, mounting flange integrity verified
- GMC cluster context: this is one of two GMC brand listings in (GMC 2500, this listing GMC 3500); cross-batch complement to GMC 1500
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used, cable inner shaft rotation verified, outer housing integrity confirmed, end fittings inspected
- Availability: In stock, GMC C2500 K2500 speedometer cable available
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Part verified as OEM mechanical speedometer drive cable for GMC C/K 2500 Series applications
- Application: GMC C/K 2500 Series 3/4-ton heavy duty pickup truck GMT400 era 1988-1998 ONLY (10 years US production - the most relevant era for speedometer cable applications)
- Pre-1996 OBD-II federal mandate: All GMC trucks used mechanical speedometer cables during this era (mechanical cable from transmission tail-housing to speedometer)
- GMT800 era 1999+ NOT applicable: Uses electronic VSS (Vehicle Speed Sensor) not mechanical cable; this listing does NOT apply to 1999+ GMC 2500 trucks
- GMC C/K 2500 positioning: 3/4-ton heavy duty pickup truck above GMC 1500 (1/2-ton light duty) and below GMC 3500 (1-ton heavy duty in pickup hierarchy
- Applications: heavy-duty tasks including heavy towing (~10,000 lbs conventional), heavy hauling, construction, agriculture, fleet / utility work
- Sister vehicle: Chevrolet C/K 2500 (identical mechanical vehicle - Chevrolet was primary brand, GMC was "Professional Grade" sister brand with similar specifications)
- Naming context: "C" prefix = 2WD (C2500), "K" prefix = 4WD (K2500) - traditional GM naming convention
- Cable inner shaft rotation verified, outer housing integrity confirmed, end fittings inspected
- GMC cluster context: this is one of two GMC brand listings in (GMC 2500, GMC 3500 - heavy-duty complement); cross-batch complement to GMC 1500 (light-duty)
- 15 day replacement warranty on component defects
GMC Truck 1500 Series Speedometer for Sale | OEM Used Instrument Cluster
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, speedometer function verified, display / needle condition documented, electrical connector integrity inspected, mileage disclosure available on request
- Availability: In stock, GMC Truck 1500 Series speedometer available; specify generation and year
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as OEM instrument cluster (speedometer assembly) for GMC light-duty full-size pickup applications
- Application: GMC light-duty full-size pickup all generations - GMC C/K 1500 1988-1998 (GMT400 platform - pre-Sierra era), GMC Sierra 1500 1999+ (renamed Sierra, multiple platforms: GMT800 1999-2006, GMT900 2007-2013, K2XX 2014-2018, T1XX 2019-current)
- Sister vehicle: Chevrolet C/K 1500 / Silverado 1500 - direct platform sister sharing chassis / engines and often IDENTICAL instrument clusters; excellent cross-reference donor
- Engines vary by generation: 4.3L V6, 5.0L V8, 5.3L V8, 6.0L V8, 6.2L V8 plus various diesel options (6.6L Duramax on later HD variants; 3.0L Duramax turbodiesel later 1500)
- CRITICAL: Clusters are NOT cross-generation compatible - a GMT400 cluster does NOT fit GMT800; a GMT900 cluster does NOT fit K2XX; specific generation match required
- Speedometer function verified (mechanical speedometer or electronic depending on year)
- Display / needle condition documented (no needle damage, no display scratches / fogging)
- Electrical connector integrity inspected (cluster wiring harness connectors)
- Mileage disclosure available on request
- 15 day replacement warranty on component defects
GMC Terrain Speaker for Sale | OEM Used Audio Speaker for GMC Terrain Compact
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, speaker cone integrity verified, voice coil function tested, mounting bracket / grille condition documented
- Availability: In stock, GMC Terrain speaker available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as OEM audio speaker for GMC Terrain compact crossover SUV applications (all generations)
- Application: GMC Terrain compact crossover SUV all generations - 1st gen 2010-2017 (GMT191 platform, boxy SUV proportions), 2nd gen 2018-current (D2XX platform, modern crossover design)
- Replaced GMC Envoy and Jimmy in compact SUV lineup
- Sister vehicle - CHEVROLET EQUINOX: Direct platform sister sharing IDENTICAL platforms, engines, electrics INCLUDING AUDIO SYSTEM COMPONENTS; excellent cross-reference donor for speaker sourcing
- Engine variants: 1st gen 2.4L I4 / 3.0L V6 / 3.6L V6; 2nd gen 1.5L / 2.0L Turbo I4, 1.6L diesel
- Audio configurations: Standard audio (4-6 speakers) or BOSE Premium (7-9 speakers with dedicated amplifier)
- Speaker position must be specified: door speakers (front and rear - typically 6.5" or 6x9"), dash speakers (typically 3.5" or 4"), tweeters (typically 1" - Bose Premium), rear deck / center channel (Bose Premium)
- Speaker cone integrity verified (no tears, no dry rot, no delamination)
- Voice coil function tested (proper resistance, no shorts, no opens)
- Mounting bracket / grille condition documented (mounting studs intact, grille not damaged)
- 15 day replacement warranty on component defects
GMC Sierra Denali 2500 Steering Wheel for Sale | OEM Used Premium Wood
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, structural integrity verified, wood / leather condition documented, control buttons inspected
- Availability: In stock, GMC Sierra Denali 2500 steering wheel available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as OEM premium wood / leather steering wheel for GMC Sierra 2500 HD Denali trim applications
- IMPORTANT: Airbag is NOT included with this steering wheel. The airbag is a separate safety system component that must be sourced separately, transferred from your existing steering wheel by a qualified installer, or installed new through proper service procedures. Airbag installation involves safety-critical procedures requiring proper training
- Application: GMC Sierra 2500 HD Denali trim heavy-duty 3/4-ton pickup truck (specify generation - GMT800 2001-2007 / GMT900 2007-2014 / K2XX 2015-2019 / T1XX 2020 plus - and year when ordering as steering wheel design varies across generations)
- Structural integrity verified (no cracks in steering wheel structure, no impact damage, hub structure intact)
- Wood / leather condition documented (any age-related wear, leather wear patterns, wood finish condition noted)
- Control buttons inspected (audio / cruise / phone / vehicle controls inspected for function and physical condition)
- Hub mounting verified (Sierra Denali 2500 specific column mounting interface)
- Chevy / GMC GMT cluster: This GMC Sierra Denali 2500 Steering Wheel is part of our Chevy / GMC cluster including Chevy Suburban 1500 Engine Bay Fuse Box + Chevy Fender Flares from
- 15 day replacement warranty on component defects (excludes airbag - airbag is not included with this steering wheel)
Geo Tracker Timing Gears for Sale | OEM Used Engine Timing Gear Set for Geo
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, gear teeth condition verified, mounting bores inspected, key / keyway integrity documented
- Availability: In stock, Geo Tracker timing gears available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as OEM engine timing gear set for Geo Tracker compact SUV applications
- Application: Geo Tracker 1989-1997 / 1998 (GM captive-import compact SUV - was rebadged Suzuki Sidekick) - 2-door convertible, 2-door hardtop, 4-door SUV body styles
- Cross-reference: Suzuki Sidekick 1989-1998 (US sibling - same vehicle different brand badging), Suzuki Vitara (international sibling vehicle), Chevrolet Tracker 1998-2004 (post-Geo brand era continuation) - parts cross-reference expands sourcing significantly
- Gear teeth condition verified (no chipped or broken teeth, no excessive wear)
- Mounting bores inspected (no scoring, proper bore tolerance for shaft fit)
- Key / keyway integrity documented (no damage to keyway or key engagement features)
- Geo captive-import cluster continuation: This Geo Tracker Timing Gears continues our Geo captive-import cluster covered in (Metro, Prizm, Spectrum, Storm); Tracker is the 5th Geo brand vehicle
- 15 day replacement warranty on component defects
Geo Storm Timing Cover for Sale | OEM Used Engine Timing Cover for Geo Storm
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, mounting holes verified, sealing surfaces inspected, cover integrity documented
- Availability: In stock, Geo Storm timing cover available
- Shipping: Free shipping to all 50 states, 5 to 10 business days
- Part verified as OEM engine timing cover for Geo Storm sporty hatchback coupe applications
- Application: Geo Storm 1990-1993 (GM captive-import sporty compact - was rebadged Isuzu Impulse) - sporty 3-door hatchback coupe with notchback wagon-back variant
- Cross-reference: Isuzu Impulse 1990-1993 (US sibling - same vehicle different brand badging) and Isuzu Stylus (sedan variant of similar platform) - parts cross-reference expands sourcing
- Mounting holes verified (all timing cover mounting holes intact, no thread damage)
- Sealing surfaces inspected (no warping, no impact damage, gasket sealing area clean)
- Cover integrity documented (no cracks, no impact damage, structural integrity intact)
- Geo captive-import cluster: This Geo Storm Timing Cover is part of our Geo captive-import cluster including Geo Metro Throwout Bearing + Geo Prizm Tie Rod + Geo Spectrum Timing Belt
- 15 day replacement warranty on component defects
Filter by price
Brands
- Aisin (1)
- American Motors Corporation (AMC) (1)
- Audi (55)
- Bentley (2)
- BMW (42)
- Borg Warner (1)
- BorgWarner (1)
- Buick (4)
- Cadillac (5)
- Caterpillar (11)
- Chevrolet (40)
- Chrysler (21)
- Cummins (11)
- Daihatsu (2)
- Dodge (32)
- Eaton (1)
- Ferrari (6)
- Fiat (11)
- Ford (83)
- General Motors (8)
- Genesis (8)
- GM (8)
- GM Small Block Compatible (1)
- GMC (10)
- Honda (32)
- Hummer (3)
- Hyundai (14)
- Infiniti (16)
- Isuzu (7)
- Jaguar (3)
- Jatco (1)
- Jeep (18)
- Kia (5)
- Lamborghini (2)
- Land Rover (10)
- Lexus (8)
- Lincoln (4)
- Mack (2)
- Mazda (18)
- Mercedes-Benz (7)
- Mercury (11)
- Mini (3)
- Mitsubishi (6)
- New Venture Gear (2)
- Nissan (43)
- Pontiac (5)
- Porsche (4)
- Subaru (20)
- Suzuki (3)
- Tesla (3)
- Toyota (36)
- Volkswagen (8)
- Volvo (17)
- ZF Friedrichshafen AG (2)
