At a Glance
- Condition: OEM used diesel engine, function tested, compression checked, oil pressure verified per unit
- Availability: In stock for Toyota 1HDT engine applications (non-US-market)
- Shipping: Free shipping to all 50 states, 5 to 10 business days on diesel engine assemblies
- Application: Toyota 1HDT diesel engine (non-US-market)
- Variant: 1HD-T (12-valve) or 1HD-FT / 1HD-FTE (24-valve) - confirm by serial
- Donor applications: Land Cruiser 80 Series / 70 Series, early Hilux, Coaster bus
- CRITICAL: Non-US-market diesel - older diesel standard only - confirm state rules
- Configuration: Long block vs complete with turbo and injection pump
- Not included: Transmission, ECU/wiring, engine mounts, exhaust, US emissions equipment unless confirmed
- Professional diesel engine installation ONLY - non-US swap requires correct mounts, fueling, cooling, emissions strategy
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 4.0L V6 engine, function tested, compression checked, oil pressure verified per unit
- Availability: In stock for Toyota 1GR-FE 4.0L V6 applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on V6 engine assemblies
- Application: Toyota 1GR-FE 4.0L V6 engine (US-market and non-US-market applications)
- Generation: VVT-i vs Dual VVT-i - affects output, confirm by VIN
- US-market donor applications: 4Runner, Tacoma, FJ Cruiser, Tundra (base V6)
- Non-US donor applications: Land Cruiser Prado, Hilux, Fortuner, Hiace
- Configuration: Long block vs complete engine with accessories
- Not included: Transmission, ECU/wiring, engine mounts, exhaust unless confirmed at order
- Professional engine installation recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used STI 6-speed transaxle, function tested, gear engagement verified, seal condition documented per unit
- Availability: In stock for Subaru WRX STI applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on transmission assemblies
- Application: Subaru WRX STI 6-speed manual transaxle (TY856WB1CA) with integrated front differential and DCCD center differential
- Chassis: GD (2004-2007) OR GR/GV (2008-2014) - confirm by VIN
- Engine: EJ25 turbo (both chassis)
- CRITICAL: Final drive and DCCD must match your rear diff and DCCD type
- CRITICAL: Clutch type - pull vs push type varies by year
- Not included: Clutch kit, flywheel, axles, rear diff, fluid, DCCD controller or wiring unless confirmed
- Professional installation recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used commercial transmission, serial-verified, rebuild and test history documented per unit
- Availability: In stock for Caterpillar CX31 commercial applications
- Shipping: Freight-forwarded to all 50 states with rigging (commercial delivery), 7 to 14 business days
- Application: Caterpillar CX31 6-speed automatic transmission (commercial / heavy-equipment)
- CRITICAL: Confirm exact host machine (or truck) and CAT engine at order
- Configuration: Mounting, input / output, and control module by serial
- Electronically controlled - must be matched to engine ECM and vehicle controls
- Host applications: Various Caterpillar machines and on-highway trucks (per live list)
- Not included: Engine, ECM, wiring, cooler, driveline, fluid, control module or software unless confirmed
- Commercial driveline installation ONLY - qualified heavy-equipment or heavy-truck technician
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 3.0L turbodiesel inline-6, function tested, compression checked, oil pressure verified per unit
- Availability: In stock for BMW N57 engine applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on inline-6 engine assemblies
- Application: BMW N57 3.0L turbodiesel inline-6 engine
- Variant: Single turbo, twin turbo, or tri-turbo (N57S) - confirm by VIN
- After-treatment: DPF and SCR/DEF - confirm it matches your car
- US-market (limited): 535d (F10), X5 xDrive35d (F15), 740Ld xDrive
- Most applications: Non-US-market BMW diesels
- CRITICAL: Confirm state emissions and registration rules for diesel install
- Configuration: Long block vs complete with turbo(s) and ancillaries
- Not included: Transmission, ECU/wiring, after-treatment hardware, engine mounts, exhaust unless confirmed
- Professional diesel installation ONLY
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 2.0L turbodiesel engine, function tested, compression checked, oil pressure verified per unit
- Availability: In stock for BMW 520d applications (non-US-market)
- Shipping: Free shipping to all 50 states, 5 to 10 business days on engine assemblies
- Application: BMW 5-Series 520d (non-US-market diesel), 5 Series F10/F11 or G30/G31 (longitudinal mount)
- Variant: N47 (about 2007 to 2014) OR B47 (2014+) - confirm by VIN
- Orientation: Longitudinal mount ONLY - NOT for transverse front-drive models (X1 F48, X2 F39, 2-Series Active Tourer)
- CRITICAL: Non-US-market diesel - confirm your state emissions and registration rules
- Configuration: Long block vs complete with turbo and ancillaries (documented before shipping)
- Not included: Transmission, ECU/wiring, after-treatment hardware, engine mounts, exhaust unless confirmed
- Professional diesel installation ONLY
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used SRS airbag, never deployed, inflator intact and unactivated, module ID documented per unit
- Availability: In stock for Land Rover Defender L663 applications (2020+)
- Shipping: Free shipping to all 50 states (hazmat / pyrotechnic-compliant), 5 to 10 business days
- Application: Land Rover Defender L663 (2020+ modern Defender)
- Type: Steering-wheel (driver) airbag per live spec; may also be passenger, curtain, or knee - confirm by VIN
- NHTSA recall status: Not on an active NHTSA recall
- CRITICAL: Classic Defender is a different vehicle - do NOT assume cross-fit
- SAFETY-CRITICAL SRS pyrotechnic device - qualified handling required
- Not included: SRS control module, clockspring, wiring, connectors, mounting hardware unless confirmed at order
- Professional SRS service ONLY: battery disconnect + standby + diagnostic tool for SRS reset / VIN coding
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used instrument cluster, display function verified, connector inspected per unit
- Availability: In stock for Land Rover Discovery Sport applications (L550, 2015+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on instrument components
- Application: Land Rover Discovery Sport (L550 chassis, 2015+)
- Configuration verification by VIN: year, market, engine, trim
- Facelift note: 2020+ facelift cluster differs from 2015-2019
- US market: mph configuration
- CRITICAL: Odometer reprogrammed to true mileage by specialist
- CRITICAL: VIN coding and possible immobilizer sync required
- Not included: Cluster bezel, trim, wiring, or programming service unless confirmed at order
- Professional fit and programming: battery disconnect, dash trim removal, diagnostic tool
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used ECM, connector inspected, module ID documented, condition assessed per unit
- Availability: In stock for Land Rover Freelander applications (Freelander 1 or Freelander 2 / LR2)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on control module components
- Application: Land Rover Freelander 1 (US 2002-2005) or Land Rover Freelander 2 / LR2 (US 2008-2015)
- Engine variants: 1.8L, 2.0L TD4, 2.5L V6 (Freelander 1); 2.2L TD4, 3.2L I6 (Freelander 2 / LR2)
- CRITICAL: Exact part number by VIN - one ECM fits one engine
- Programming: VIN-specific flashing required by specialist
- Security: Immobilizer sync required - NOT plug-and-play
- Not included: Programming service, mounting bracket, connectors, keys unless confirmed at order
- Professional fit and programming; battery disconnect and dealer-level diagnostic tool required
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used glove box assembly, structural integrity inspected, lock function verified per unit
- Availability: In stock for Range Rover Velar applications (L560, 2017+)
- Shipping: Free shipping to all 50 states, 3 to 7 business days on interior components
- Application: Range Rover Velar (L560 chassis, 2017 onward)
- Scope: Full assembly with integrated lid
- Finish: Aluminum or piano-black (verify by VIN)
- Trim variations: Lock and lighting by trim level
- Cooling duct sold separately on climate-controlled trims
- Not included: Cooling duct, keys, dashboard trim unless confirmed at order
- Basic hand tools plus dashboard disassembly; professional install recommended
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used transmission oil dipstick, length verified, O-ring condition documented per unit
- Availability: In stock for GMC Sierra 2500 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on dipstick components
- Application: GMC Sierra 2500 (heavy-duty three-quarter-ton pickup) transmission dipstick
- CRITICAL: Transmission oil dipstick (NOT the engine oil dipstick)
- Transmission variants: 4L60E (~28 in / 711 mm) or 4L80E (~32.5 in / 826 mm) - by VIN or RPO code
- Allison 1000 (Duramax): NOT covered by this listing
- Deep aftermarket pan note: May need a longer dipstick
- Not included: Dipstick tube, additional O-ring, or transmission fluid unless confirmed at order
- Basic hand tools; inserts into existing transmission dipstick tube
- Check ATF at operating temperature for Full Hot reading
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used emblem, surface condition documented, adhesive backing inspected per unit
- Availability: In stock for GMC Sonoma (1991-2004) and GMC S-15 (1982-1990) applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on emblem components
- Application: GMC Sonoma (1991-2004) or GMC S-15 (1982-1990, earlier GMC compact truck)
- CRITICAL: GMC Sonoma / S-15 emblem, NOT Chevrolet S-10 (which wears a Chevrolet emblem)
- Location: Hood, tailgate, grille, or fender
- Condition: New or used (verify at order)
- Adhesive: Whether adhesive is included
- Not included: Additional adhesive, removal tools, or paint unless confirmed at order
- Basic surface prep and adhesive mounting; no drilling needed
- 15 day replacement warranty on component defects
Filter by price
Brands
- Aisin (1)
- American Motors Corporation (AMC) (1)
- Audi (55)
- Bentley (2)
- BMW (42)
- Borg Warner (1)
- BorgWarner (1)
- Buick (4)
- Cadillac (5)
- Caterpillar (11)
- Chevrolet (40)
- Chrysler (21)
- Cummins (11)
- Daihatsu (2)
- Dodge (32)
- Eaton (1)
- Ferrari (6)
- Fiat (11)
- Ford (83)
- General Motors (8)
- Genesis (8)
- GM (8)
- GM Small Block Compatible (1)
- GMC (10)
- Honda (32)
- Hummer (3)
- Hyundai (14)
- Infiniti (16)
- Isuzu (7)
- Jaguar (3)
- Jatco (1)
- Jeep (18)
- Kia (5)
- Lamborghini (2)
- Land Rover (10)
- Lexus (8)
- Lincoln (4)
- Mack (2)
- Mazda (18)
- Mercedes-Benz (7)
- Mercury (11)
- Mini (3)
- Mitsubishi (6)
- New Venture Gear (2)
- Nissan (43)
- Pontiac (5)
- Porsche (4)
- Subaru (20)
- Suzuki (3)
- Tesla (3)
- Toyota (36)
- Volkswagen (8)
- Volvo (17)
- ZF Friedrichshafen AG (2)
Recently Viewed Products
At a Glance
- Condition: OEM used tempered rear glass, glass inspected, edge condition verified, clarity documented per unit
- Availability: In stock for Austin 1800 applications (1964-1975)
- Shipping: Free shipping to all 50 states, 5 to 10 business days on glass components (careful handling)
- Application: Austin 1800 (classic non-US market British family sedan)
- Exact year verification required
- Glass with no cracks, chips, or deep scratches
- Edge condition sound, no chips that spread
- Clarity - no delamination or fogging in the layers
- Not included: gaskets, trim clips, urethane unless ordered
- Glass setting tools + correct urethane or gasket + second person required
- Classic vehicle disclosure applies (approximately 50-60 years old)
- 15 day replacement warranty on component defects
Jeep Wrangler Fender Flares for Sale | OEM Used Fender Flare Sets for Jeep
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, structural integrity verified, mounting features inspected, surface condition documented
- Availability: In stock, Jeep Wrangler fender flares available
- Shipping: Specialty shipping to all 50 states (fender flare sets require careful packaging), 5 to 10 business days
- Part verified as OEM fender flare sets for Jeep Wrangler applications
- Application requires Wrangler generation specification (YJ 1987-1995, TJ 1997-2006, JK 2007-2018, JL 2018 plus - fender flare designs are NOT interchangeable between generations)
- Structural integrity verified (no cracks, no broken mounting points, no impact damage)
- Mounting features inspected (retention clip points, hardware holes, body alignment features)
- Surface condition documented (color match, any UV fading, paint condition where painted)
- Edge condition documented (no major chipping, no broken edges)
- Set completeness verified (specify full set of 4 or specific corners when ordering)
- 15 day replacement warranty on component defects
Jeep XJ Fender Flares for Sale | OEM Used Authentic Cherokee XJ Fender Flares
Rated 5.00 out of 5
2 reviews
In Stock
At a Glance
- Condition: OEM used, structural integrity verified, mounting features inspected, surface condition documented
- Availability: In stock, Jeep XJ fender flares available
- Shipping: Specialty shipping to all 50 states (fender flare sets require careful packaging), 5 to 10 business days
- Part verified as authentic Cherokee XJ fender flares for 1984-2001 Cherokee XJ applications
- Application: Jeep Cherokee XJ compact SUV (1984-2001 production - long 17-year production run; AMC era 1984-1987 then Chrysler era 1987-2001)
- Structural integrity verified (no cracks, no broken mounting points, no impact damage)
- Mounting features inspected (retention clip points, hardware holes, body alignment features)
- Surface condition documented (color match, any UV fading, paint condition where painted)
- Edge condition documented (no major chipping, no broken edges)
- Set completeness verified (specify full set of 4 or specific corners when ordering)
- Unibody Jeep design note: XJ Cherokee was unusual for Jeep in using unibody construction (most Jeep models use body-on-frame); this affects fender flare design vs body-on-frame Wrangler
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used 12V solenoid, electrical function tested, connector integrity verified, mounting hardware inspected
- Availability: In stock for Nissan 300ZX Z31 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Nissan 300ZX Z31 chassis (1984-1989 US market) - Nissan's Z-car sport coupe on the Z31 chassis (third-generation Nissan Z-car)
- 12V solenoid: Standard 12V solenoid application in the Nissan 300ZX Z31 electrical system
- Application matched by part number: Solenoid matched to your specific 300ZX application by part number verification
- Z31 direct application: Direct application for Z31 300ZX 1984-1989 US market
- Z32 300ZX (1990-1996) cross-reference: Different generation - confirmed by part number only for Z32 applications
- VG30E and VG30ET Turbo: Most solenoids shared between VG30E naturally aspirated and VG30ET Turbo trims per the source data - verify by VIN or part number
- Predecessor: Nissan 280ZX S130 (1979-1983 - see our related 280ZX rack and pinion listing)
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used factory alloy or steel wheel, integrity assessed, mounting surface inspected, finish condition documented per unit
- Availability: In stock for 2020 and newer Hyundai Venue applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on wheel components
- Application: 2020 and newer Hyundai Venue (subcompact CUV / crossover)
- Wheel size options: 15, 16, or 17 inch (verify diameter and width)
- Bolt pattern: 4x100mm (verify at order)
- Finish options: Painted (matte black or color-matched), machined (two-tone), or gunmetar (darker gray)
- Tire mounting and balancing by tire shop required
- TPMS sensor transfer or new sensor required
- Related Hyundai listings: See our Hyundai Kona Electric Uniside, Hyundai Accent Trim Ring, and Hyundai Azera Trunk Lid Pull Down Motor listings
- 15 day replacement warranty on component defects
