At a Glance
- Condition: OEM used SRS airbag, never deployed, inflator intact and unactivated, module ID documented per unit
- Availability: In stock for Land Rover Defender L663 applications (2020+)
- Shipping: Free shipping to all 50 states (hazmat / pyrotechnic-compliant), 5 to 10 business days
- Application: Land Rover Defender L663 (2020+ modern Defender)
- Type: Steering-wheel (driver) airbag per live spec; may also be passenger, curtain, or knee - confirm by VIN
- NHTSA recall status: Not on an active NHTSA recall
- CRITICAL: Classic Defender is a different vehicle - do NOT assume cross-fit
- SAFETY-CRITICAL SRS pyrotechnic device - qualified handling required
- Not included: SRS control module, clockspring, wiring, connectors, mounting hardware unless confirmed at order
- Professional SRS service ONLY: battery disconnect + standby + diagnostic tool for SRS reset / VIN coding
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used clockspring, continuity tested, spiral cable inspected, connector condition documented per unit
- Availability: In stock for BMW i8 Coupe (2014-2020) and Roadster applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on SRS components
- Application: BMW i8 (hybrid supercar) - SRS spiral cable clockspring
- Part number verification required
- CRITICAL: SRS reset required after install with BMW-capable diagnostic tool
- Applies to i8 Coupe (2014-2020) and i8 Roadster (later years)
- Not included: Steering wheel, airbag, column switches, and trim unless confirmed at order
- Professional installer required for airbag reset and code clear
- SRS airbag system component - safety-critical part
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used engine coolant pump / water pump, function tested, shaft play assessed, weep hole condition inspected
- Availability: In stock for 1996 to 2008 Hyundai Tiburon applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on cooling components
- Application: 1996 to 2008 Hyundai Tiburon (sporty coupe)
- Engine-specific: Four-cylinder Beta engine OR V6 Delta engine (confirm at order)
- Common failure symptoms: Coolant leak at weep hole / gasket, overheating, noise or pulley play
- Fresh pump gasket recommended for any install
- Coolant system bleeding required after install per the source data
- Related Hyundai listings: See our Hyundai Santa Fe Valve Cover, Hyundai Kona Electric Uniside, and Hyundai Ioniq Engine listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used radiator overflow bottle / coolant overflow reservoir, integrity assessed, cap / hose interface inspected, seam condition documented per unit
- Availability: In stock for 1982 to 1988 Ford EXP applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on cooling components
- Application: 1982 to 1988 Ford EXP (Escort-based sporty two-seater)
- Coolant overflow reservoir for leaks, cracks, warping, or low-level scenarios
- Direct fit configuration
- Year verification required so cap and hose interfaces match
- Classic vehicle disclosure applies
- Related Ford listings: See our Ford Aerostar Pressure Plate, Ford Bronco Raptor Quarter Panel, and Ford Contour Quarter Window listings for related Ford lineage context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used electric power steering (EPS) motor, function tested, mounting features inspected, connector integrity assessed
- Availability: In stock for modern Fiat 600 EPS motor applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days on EPS motor components
- Application: Modern Fiat 600 (600e / Hybrid) EPS motor - NOT the classic 1955 to 1969 car
- System: Electric power steering (EPS) motor
- Mount configuration: Column-mounted or rack-integrated EPS unit
- Coding note: Software coding to the specific vehicle may be required at installation
- Related Fiat listings: See our Fiat 500 Power Steering Cooler listing for related Fiat power steering component context
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used coolant expansion tank / reservoir, cap seal condition assessed, structural integrity verified, port fittings inspected
- Availability: In stock across Audi Q8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi Q8 - Audi's coupe-style flagship SUV positioning (SQ8 higher-performance variant, RS Q8 highest-performance variant)
- OE coolant expansion tank: Standard cooling system coolant expansion / reservoir tank
- 4M platform (MLB Evo): The Q8 shares 4M / MLB Evo platform with the Audi Q7 (see our related Audi Q7 Water Pump listing) and various other Volkswagen Group premium SUVs
- Related Audi listings: See our Audi Q7 Water Pump and Audi SQ5 Glove Box listings for related Audi SUV heritage
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used driver air bag module, NOT deployed, complete cover with Audi rings, inflator, and folded cushion per the source data
- Availability: In stock for Audi RS5 B8 platform applications (donor 2010 per the source data)
- Shipping: Free shipping to all 50 states, 3 to 7 business days (hazmat requirements apply for airbag modules)
- Application: Audi RS5, B8 platform (donor 2010 per the source data) - Audi Sport's highest-performance A5 variant
- OEM driver SRS module: Steering-wheel-mounted driver air bag module
- NOT deployed: Module has not been deployed - standard used SRS module condition for reuse applications
- CRITICAL: Qualified technician installation required: Per the source data, this module must be installed and the SRS lamp reset by a qualified technician with proper diagnostic equipment - NOT an owner-installed component
- US-market RS5 (2013 on): Call with your VIN - the donor is a 2010 European-launch car per the source data
- Recall status verification required: Confirm the module is clear of any open safety recall for your VIN before fitment per the source data
- Related Audi listings: See our Audi A5 Master Cylinder listing for the related A5 platform (RS5 is Audi Sport's highest-performance A5 variant)
- 15 day replacement warranty on component defects (excluding installation labor and SRS reset)
At a Glance
- Condition: OEM used cast aluminum power steering pump, hydraulic function verified, pulley integrity assessed, port fittings inspected
- Availability: In stock across Audi A8 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi A8 - Audi's flagship full-size executive sedan (Audi's flagship sedan positioning)
- Cast aluminum construction: standard power steering pump material with cast aluminum housing for appropriate structural integrity and thermal management
- 130mm 6-groove pulley: Specific pulley dimensions - 130mm diameter with 6-groove (6-rib) serpentine belt configuration
- D3 / D4 / D5 platform generations: A8 spans multiple Audi flagship platform generations - verify chassis code when ordering
- Related Audi listings: See our Audi A5 master cylinder, A6 tie rod, A7 screen, AllRoad headlight, and A4 AllRoad tail light listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used hardened steel tie rod set (left and right), structural integrity verified, threading condition assessed, ball joint condition inspected
- Availability: In stock across Audi A6 model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Audi A6 - Audi's executive mid-size sedan (Audi's B-segment executive sedan positioning)
- Left and right tie rod set: Complete pair for full front-suspension tie rod replacement
- Hardened steel construction: standard tie rod material with hardened steel providing appropriate strength for suspension steering link applications
- C6 / C7 / C8 platform generations: A6 spans multiple Audi platform generations - verify chassis code when ordering
- Post-installation wheel alignment REQUIRED: Tie rod replacement affects toe alignment - wheel alignment service required after installation
- Related Audi listings: See our Audi A5 master cylinder, A7 screen, A8 power steering pump, AllRoad headlight, and A4 AllRoad tail light listings
- 15 day replacement warranty on component defects
At a Glance
- Condition: OEM used power-assisted rack and pinion, internal seal condition assessed, tie rod ends inspected, mounting features verified
- Availability: In stock for classic Nissan 280ZX applications
- Shipping: Free shipping to all 50 states, 5 to 10 business days on steering rack assemblies
- Application: Nissan 280ZX (S130 chassis) 1979-1983 US market - Nissan's Z-car sport coupe / GT with modernized S130 chassis
- Power-assisted steering: Power-assisted rack and pinion providing hydraulic assist for reduced steering effort
- S130 chassis: The S130 succeeded the S30 280Z (see our related 280Z fuel pump listing) as Nissan's Z-car flagship
- Modernized GT positioning: The S130 280ZX moved the Z-car toward more of a luxury GT positioning vs the pure sport coupe positioning of the S30 Z-cars
- L28 continuation: The 280ZX continued Nissan's L28 2.8L inline-6 engine base including a turbocharged L28ET variant in later 280ZX applications
- Predecessor to Z31 300ZX: Successor is the Nissan 300ZX Z31 (1984-1989) - see our related 300ZX solenoid listing
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used fan shroud, structural integrity verified, mounting tabs inspected, fan clearance geometry assessed, classic-vehicle disclosure applies
- Availability: In stock for classic Nissan 240SX S13 applications
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Nissan 240SX (S13 chassis) 1989-1994 US market - Nissan's classic sport compact / sport coupe on the legendary S13 chassis
- S13 platform: The Nissan 240SX S13 is one of the most legendary sport compact platforms in Japanese automotive heritage
- OE-fit configuration: Fan shroud configuration matches original equipment for direct replacement fit
- Predecessor: Nissan 200SX S12 (1984-1988 US market) - see our related 200SX ECU listing for the S12 predecessor context
- Successor: Nissan 240SX S14 (1995-1998 US market) - different chassis architecture, different fan shroud configuration
- Classic drift heritage: The S13 240SX became legendary in drift motorsport globally - one of the most influential drift chassis in the drift community
- 15 day replacement warranty on component defects, classic-vehicle disclosure applies
At a Glance
- Condition: OEM used thermoplastic fan shroud, structural integrity verified, mounting tabs inspected, fan clearance geometry assessed
- Availability: In stock across Renegade model years
- Shipping: Free shipping to all 50 states, 3 to 7 business days
- Application: Jeep Renegade 2015+ US market - Jeep's subcompact SUV positioned at the entry level of the Jeep lineup
- OE-profile thermoplastic construction: standard fan shroud material with good thermal stability and structural integrity for engine bay applications
- Fiat 500X platform sibling: The Jeep Renegade shares platform architecture with the Fiat 500X - post-Fiat / Chrysler merger platform sharing arrangement
- Engine matching: Different Renegade engine variants use different fan shroud configurations - engine match required at order
- Related Jeep listings: See our Jeep Liberty PCM and Jeep Patriot oil pan listings for related Jeep unibody vehicles
- 15 day replacement warranty on component defects
About Us
At Part Nests, we specialize in high-quality used and OEM auto parts, with a wide selection of components ready to ship to customers.
Need Help?
Opening Hours :
Monday – Friday: 9:30 AM – 6:00 PM
Office Address :
8415 WOODSBORO PIKE STE J,
WALKERSVILLE, MD 21793, USA












